NTT docomo P-01C Instruction Manual
  1. Manuals
  2. Brands
  3. NTT docomo Manuals
  4. Cell Phone
  5. P-01C
  6. Instruction manual

NTT docomo P-01C Instruction Manual

Krc1141
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-01C
'10.11
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-01C and is the answer not in the manual?

Questions and answers

Related Manuals for NTT docomo P-01C

Summary of Contents for NTT docomo P-01C

  • Page 1 P-01C ’10.11 INSTRUCTION MANUAL...
  • Page 2 For Using This Manual http://www.nttdocomo.co.jp/support/trouble/manual/ ⿠Note that “P-01C” is referred to as “FOMA terminal” in this manual. download/index.html ⿠Most operating procedures and displays in this manual are shown with ※ Note that the URL and published contents may be modified the default settings of the “Onyx Black”...

  • Page 3: Table Of Contents

    Introduction FOMA Terminal ····································2 Precautions ··········································6 Contents What You can Do with P-01C ···············3 Handling Precautions ························14 P.1 ～ ▶ Part Names and Functions ··················4 Before Using ·····························17 Character Entry·························27 Lock/Security ····························35 Basic Charging, Power ON/OFF, etc. Various Security Codes,...

  • Page 4: Foma Terminal

    FOMA Terminal ⿠Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a fi ne view such as in a high-rise building or apartment.

  • Page 5: What You Can Do With

    What You can Do with P-01C Picture Album ▶ P.59 Key Layout 使いかたナビ (Guide) ▶ P.26 You can modify the slant of Ergonomically-designed key You can check “使いかたナビ (Guide)” the still images which were layout and the large letters/ on screen for how to operate a...

  • Page 6: Part Names And Functions

    Part Names and Functions ❶ Light sensor �+ h Power/End key ❶ ❾ For sensing brightness (Do not cover it with your For turning on/off the power or ending a call ❷ hands or do not put a sticker on it. Doing so might �...
  • Page 7 Call/Charging indicator v Memo/Manner key Lights while you are receiving a call or x Multi key message, talking, or charging. For showing the Task menu Speaker One-push open button  f mark For opening the FOMA terminal (Be careful not An IC card is installed.

  • Page 8: Precautions

    Precautions ALWAYS FOLLOW THESE DIRECTIONS ■ Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. Denotes not to touch with wet hands. After reading the precautions, keep them in a safe place. Not wet ■...
  • Page 9 General precautions for FOMA the batteries and adapters other places where fl ammable terminal, batteries, adapters, specifi ed by NTT DOCOMO, INC. gases are generated, be and UIM Fire, burns, injury or electric shock may absolutely sure to turn off result.
  • Page 10 Do not store in humid or dusty Turn off the FOMA terminal in Precautions for FOMA terminal places, or in high temperature places where use is prohibited environments. such as in airplanes and Warning Don’t hospitals. Fire, burns or electric shock may result. Otherwise, the electronic devices and If the FOMA terminal and its electronic medical equipment in those...
  • Page 11 If you are using an electronic Before using the FOMA terminal Caution medical device or other type inside a car, check with its of device, check with its manufacturer or dealer whether manufacturer or vendor as to Do not swing around the FOMA the signals from the FOMA terminal by its strap or other whether it will be affected by...
  • Page 12 Do not pierce it with nails, hit it Precautions for batteries Caution with a hammer, or step on it. ■Check the description on the label of Otherwise, the battery pack may ignite, Don’t burst or overheat and its electrolyte may the battery pack for the type of battery.
  • Page 13 Do not place heavy objects on If a fuse of the DC adapter Precautions for adapters the adapter cord. has blown, replace it with a Fire, burns or electric shock may result. specified fuse. Warning Don’t Fire, burns or electric shock may result. For the specified fuse, refer to each When plugging the AC adapter instruction manual.
  • Page 14 If liquids such as water get in Turn off the FOMA terminal in Notes on using near electronic the adapter, unplug the power trains during the rush hour or medical equipment cord immediately from the outlet other crowded areas as there Pull the or cigarette lighter socket.
  • Page 15 ■List of materials used Where it is used Material/Finishing Battery pack Resin area Where it is used Material/Finishing Label Outer casing Display surface PA/UV coating Terminal area Glass epoxy substrate/ Operation key surface, PC/UV coating nickel plating + gold plating Projection part of Screw (Battery compartment) Aluminum-killed steel/chrome plating...

  • Page 16: Handling Precautions

    Handling Precautions ■Do not apply excessive force onto the ■Do not insert an external device to the General notes FOMA terminal and battery pack. connector terminal (earphone/microphone terminal) at a slant when connecting, and If you put the FOMA terminal in a bag along ■Do not wet the equipment.
  • Page 17 ■Do not place magnetic cards or similar ■It is recommended that you make separate Notes on handling adapters objects near the FOMA terminal or between notes of the information stored on the UIM phone parts. and keep such notes in a safe place. ■Charge the battery in a place with an Magnetic data on cash cards, credit cards, We take no responsibility for any loss of the stored...
  • Page 18 Caution ■Do not use the modified FOMA terminal. Using a modified FOMA terminal infringes the Radio Law. The FOMA terminals are granted technical regulations conformity certification as the specified radio equipment under the Radio Law and bear a “technical conformity mark ”...

  • Page 19: Before Using

    Attach the battery pack. Attach the battery pack. Arrow mark Before Using Projection With the arrow mark facing With the arrow mark facing up, securely attach the battery Attaching UIM (FOMA Card)/ Battery Pack pack through the dents of the FOMA terminal, and then push Remove the back cover.
  • Page 20 ■Charging Using Desktop Holder Charging ■ Call/Charging indicator Charging Using AC Adapter AC Adapter’s Power plug socket Call/Charging AC Adapter’s plug indicator Power socket Connector Connector Connector terminal terminal AC Adapter Cover Connector Engraved AC Adapter Engraved surface surface (down side) Charging terminal Desktop Holder With the engraved surface of the connector...
  • Page 21 Turning Power ON Confi guring Initial Setting h for at The Initial Setting display appears when you turn on Press and hold the power for the fi rst time. least one second. Set your Terminal Security Code. Set your Terminal Security Code. After the Wake-up display is displayed, the Stand-by display You can set your Terminal Security Code required for...
  • Page 22 Checking Your Own Phone Number Switching to English Display m from the Stand-by m from the Stand-by display 設定／サービス (Set./Service) ▶ ▶ display display Phonebook ディスプレイ (Display) ▶ ▶ Own number バイリンガル ( Select language) ▶ o to switch the You can press tabs.

  • Page 23: Screen Explanation

    Screen Explanation Viewing Display/Icon Battery level (estimate) Status icon ········ Vibrator is set. Full ········ Ring Volume is set to ⿠When is shown, charge the battery. “Silent”. ⿠Depending on the usage ········ In Manner Mode state, the battery level indication ····...
  • Page 24 Navigation Displays and Key Operations Notifi cation icon ··· New i-mode mail or SMS Key operations you can perform while you are operating a function are shown at the bottom of the ··· Missed call display. (Navigation displays) ···· Record message ■Key assignments and basic navigation displays ·····...
  • Page 25 ■Command navigation key Navigation Displays while Dialing Enter numeric strings on the Stand-by display. Then ⿠Moves the cursor or ⿠Moves the cursor to the key operations of the several available function appear highlighted display up. (Hold right. on the display according to the number of digits. You ⿠Scrolls forward page by down to scroll continuously.) can now get the target function with a single key press.
  • Page 26 ■Simple Menu Menu Operation ■Main Menu Simple Menu is a menu focusing on only basic functions for easy operation. By setting “Menu icon m from the Stand-by display to show Main Menu. Press setting” to “Simple menu”, you can show the Simple m from the Stand-by display.
  • Page 27 Function menu Functions Starting with Simple Operation When “ ” is displayed at the lower right of the Depending on the function, you can start it either by display, you can use functions such as Store, Edit, and selecting a menu item or by key operation from the Delete by pressing Stand-by display.
  • Page 28 Using Guide You can search and check the operating methods of the functions you want to know and use. You can execute some functions from “使いかたナビ (Guide)”. This function is available in Japanese mode only. m from the Stand-by ▶ display display LifeKit...

  • Page 29: Character Entry

    Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. Switch between input modes. Switch between input modes. Convert/fi x characters. Each time you press Each time you press o to specify the area 1.
  • Page 30 <Example> Entering “タダの菓子” in a text memo. m from the Stand-by o to move the ▶ display display Stationery cursor onto “の”. cursor onto “ ▶ Text memo ▶ Select <Not recorded>. o to move the Enter hiragana characters Enter hiragana characters in Kanji/Hiragana input in Kanji/Hiragana input cursor onto the candidate...

  • Page 31: Sound/Screen Setting

    Sound/Screen Setting Adjusting Ring Volume <Example> Adjusting the ring volume for incoming Changing Ring Tone voice calls m from the Stand-by display <Example> Changing the ring tone for incoming voice ▶ ▶ ▶ Set./Service Sound Ring volume calls m from the Stand-by display Select “Phone”.
  • Page 32 Using Manner Mode Setting Keypad Sound OFF With a single key press, you can set a tone from the You can silence a Keypad sound for when you press a FOMA terminal such as a ring tone, keypad sound, key. and alarm sound silent.
  • Page 33 ■ ■ Changing Display Brightness Making Display Hard to See from People Around You can set Backlight to OFF. Then the display dims, and the key light turns off. You can also set the time You can set “View blind” to make it harder for the that elapses before Power Saver Mode activates.
  • Page 34 ■ Changing Font Size Using Kisekae Tool You can change font sizes at a time. You can set the ring tone, Stand-by display, menu m from the Stand-by display icons and others at a time. ▶ ▶ Set./Service Display m from the Stand-by display ▶...
  • Page 35 Changing Illumination Checking Missed Calls and New Mail by Tone and Call/Charging Indicator You can set the pattern of the illuminations such as for incoming calls and talking at a time. With the FOMA terminal closed, you can check for m from the Stand-by display missed calls, new mail and others.
  • Page 36 ■ Auto eco Mode Setting Switching to the eco Mode This setting ensures that the mode will be With a single key press, you can set the eco Mode automatically set to the eco Mode when the remaining that reduces battery consumption. Changing to eco battery level has dropped below the set level.

  • Page 37: Lock/Security

    ■ Terminal Security Code Lock/Security “0000” at purchase This is a four-to-eight digit number for deleting all Various Security Codes fi les or changing settings. When the display for entering the Terminal Security Code appears, enter your four-to-eight digit code and press ■Caution on security codes To change ⿠You should avoid using the numbers for security codes...
  • Page 38 ■ ■ PIN1 Code/ PIN2 Code PIN Unblocking Key (PUK) “0000” at the time of your contract For the UIM, you can set two security codes, namely The PIN unblocking key (PUK) is the eight-digit number the PIN1 code and PIN2 code. for releasing the blocked PIN1 code and PIN2 code.
  • Page 39 Omakase When you have lost your FOMA Various Lock Functions Lock terminal or in other cases, you can lock A variety of lock functions is installed on your FOMA your personal data (such as Phonebook terminal such as preventing illegal use of a third entries) and the IC card function of party, or protecting your private information.
  • Page 40 Setting Incoming Call Restriction Resetting to Default ■ ■ Rejecting Calls without Caller ID Resetting the Function Settings to Default You can set whether to receive (accept) or not to receive You can reset the items on “Function List”, which are (reject) a voice call and videophone call according to indicated by .

  • Page 41: Call Telephone

    ■ Making a Call from Phonebook Call Telephone <Example> Search a Phonebook entry by the name Making a Call/Videophone Call stored in Phonebook ■Making a Call by Entering the Phone o from the Stand-by display. Press Press Number From the Stand-by display, enter a From the Stand-by display, enter a Select “Name?”.
  • Page 42 ■ ■ Making a Call with Redial/Received Making an International Call Calls You can use WORLD CALL to make an international o (Redial) or o (Received call from Japan. Press Press ⿠Contact “docomo Information Center” on the back page calls) from the Stand-by display. calls) from the Stand-by display.

  • Page 43: Receiving A Call/Videophone Call

    Receiving a Call/Videophone Call When You cannot Answer a Call ■ Activate Record Message A call comes in. A call comes in. By activating Record Message, you can record a The ring tone sounds and the Call/Charging indicator The ring tone sounds and the Call/Charging indicator caller’s voice/video message when you cannot answer lights.
  • Page 44 ■ ■ Using Public Mode (Drive Mode) Using Public Mode (Power Off) Once you activate Public mode (Drive mode), the Once you activate Public mode (Power off), the guidance is played back telling that you cannot guidance is played back when receiving a call while answer the call as you are currently driving or in a the power is off, telling that you cannot answer place where you should refrain from speaking on the...
  • Page 45 Using Various Network Services ■Network services available The following are the DOCOMO network services available for the FOMA terminal. ⿠The network services are not available when you are out of the service area or out of reach of radio waves. ⿠For details, refer to “Mobile Phone User’s Guide [Network Services]”.
  • Page 46 ■ ■ Using Voice Mail Service Using Call Waiting Service m from the Stand-by display m from the Stand-by display ▶ ▶ ▶ ▶ Set./Service NW services Set./Service NW services ▶ ▶ Voice mail Call waiting To activate the service To activate the service ▶...
  • Page 47 Emergency Call Emergency calls Phone number Calls to police Calls to fire station and ambulance Calls for accidents at sea ⿠This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.
  • Page 48 ■Available Service Overseas Using Overseas Communication Service GPRS ○ ○ ○ ※1 Voice call International Roaming (WORLD WING) is a service that ※1 ○ ー ー Videophone call allows you to use the FOMA terminal with the phone ※2 ○ ○...

  • Page 49: Mail

    ■Making a Call to Outside the Country Mail You Stay in Sending i-mode Mail 0 (for at least one second) from the ▶ Stand-by display Stand-by display Enter numbers in Once you subscribe to i-mode, you can exchange e-mail order of country/area code→area code messages over the Internet.
  • Page 50 Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or You can create impressive messages by inserting text background color, or insert images or Deco-mail or images into a Flash fi le. pictograms. 1 1 1 1 l from the Stand-by display l from the Stand-by display ▶...
  • Page 51 ■ Replying to i-mode Mail Displaying Received i-mode Mail Press Press ) while an i-mode mail ▶ l from the Stand-by display Inbox is displayed. is displayed. Enter each item. Enter each item. Select a folder. Select a folder. Press Press Select an i-mode mail message.
  • Page 52 ■ ■ Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail You can use “Auto-sort” to sort received/sent i-mode message or Message R/F. mail messages into a folder such as “Business” or “Friend”...
  • Page 53 Early Warning “ Area Mail” Using SMS ■Receiving Area Mail You can send text messages to the mobile phone number at the other party. You can receive information such as about earthquake ■ Sending SMS alerts that are issued from the Japan Meteorological Agency as an Area Mail message.

  • Page 54: Phonebook

    ■ Displaying Received SMS Message Phonebook ▶ l from the Stand-by display Inbox Storing Phonebook Entries ■Storing New Phone Numbers/Mail Select a folder. Select a folder. Addresses, etc. You can store Phonebook entries in the FOMA terminal (Phone) or on the UIM. Select an SMS message.
  • Page 55 ■Storing Phonebook Entries from Editing Phonebook Entries Redial/Received Call o from the Stand-by display o (Redial) or o (Received Press Press ▶ Search and select a Phonebook entry. calls) from the Stand-by display. calls) from the Stand-by display. Highlight a call record and press Highlight a call record and press ▶...

  • Page 56: I-Mode/Full Browser

    i-mode/Full Browser ■Before using i-mode ⿠Content of sites or websites is in general protected Displaying i-mode Sites by copyrights law. You can use data such as text and images for your entertainment, which you download i-mode is a service that enables you, by using the to your i-mode phone, but you cannot use them, part display of the FOMA terminal supporting i-mode or whole of it as is, or modify them for the purpose of...
  • Page 57 Displaying Websites Designed for Switching Browsers You can switch to Full Browser to show the Internet websites incorrectly displayed by i-mode. You can browse Internet websites designed for PCs ⿠The billing system differs between i-mode and Full using the Full Browser function. Browser.

  • Page 58: Viewing And Operating Sites

    Viewing and Operating Sites Saving Site Contents Operations on site viewing display If you save the page once you visited as a screen memo, you can easily refer to it without connecting to Scroll display/Move highlighted/ i-mode. Move the pointer: + ) while the site is displayed Select an item (link): ▶...

  • Page 59: I-Channel

    ■Displaying i-Channel i-Channel o from the Stand-by display. Press Press This service distributes information such as news and weather forecast to i-Channel mobile phones. The automatically received latest information fl ows on the Stand-by display by tickers. You can read it on the i-Channel list by pressing the i-Channel key.

  • Page 60: Camera

    Camera Viewing and Operating Finder Display Menu Image stabilizer You can check the settings. : Auto Select photo mode : intelligent Auto Continuous setting Image size setting : 1 image : WVGA (480×854) Number of recordable image Image quality setting Shows the number of remaining recordable : Super Fine still images.
  • Page 61 Shooting Still Images/Moving Pictures Viewing Still Images/ Moving Pictures after Shooting ■Shooting Still Images ( Digicam Mode) You can shoot still images within the sizes from The still image you shot is saved to “My picture” Stand-by (240 x 428) to 5M (1944 x 2592). in Data Box.
  • Page 62 ■ Shooting Still Images Using Auto Shooting in Various Ways Shutter ■ Continuous Shooting Still Images The camera automatically shoots identifying the number of faces and the distance between faces by You can continuously shoot still images within the face recognition. sizes from Stand-by (240 x 428) to VGA (640 x 480).

  • Page 63: 1Seg

    1Seg Using 1Seg ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).

  • Page 64: Watching 1Seg, Etc

    Setting Channels Watching 1Seg When you activate 1Seg for the fi rst time or change c for Press and hold the area you are in, you need to operate “Channel at least one second from setting”. Select “Auto channel setting” to enable you the Stand-by display.
  • Page 65 Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Video being recorded Program Information (outline) Video Switch Visual Image/Caption Caption Airwave Reception Level (estimate) 　 　 Data Broadcasting Strong Weak Operation Mode “ ” appears out of the broadcasting area. : Video Mode Sound Volume Displayed while receiving caption...
  • Page 66 Setting Timer Watching or Recording Playing Recorded Video 1Seg m from the Stand-by display ▶ ▶ Set the date and time, a channel, and program name, and Data box 1Seg enter them to the TV Timer List or Timer Recording List. ▶...

  • Page 67: Music

    Music Setting Programs ▶ m from the Stand-by display MUSIC Music&Video Channel ▶ ▶ Music&Video Channel Set program Music&Video Channel is a service which automatically Follow the instructions on the display Follow the instructions on the display delivers up to about one-hour programs at night just by selecting your favorite music programs etc.
  • Page 68 ® Downloading Chaku-uta Full Playing Music Files Music Files ® MUSIC Player enables you to play Chaku-uta Full music fi les you have downloaded from sites, or to ® You can download Chaku-uta Full music fi les from ® play Windows Media Audio (WMA) fi les you saved on sites.

  • Page 69: I-Αppli

    i- α ppli Downloading i-αppli from Sites Select a software program from a Select a software program from a downloadable site. downloadable site. “i-αppli” is a software program for i-mode mobile phones. By downloading various software programs from the Select “OK” when downloading ends. Select “OK”...

  • Page 70: I-Motion/Movie

    i-motion/ Movie Downloading i-motion/Movie Select an i-motion/movie fi le from a Select an i-motion/movie fi le from a i-motion is a fi le consisting from video, audio, and downloadable site. downloadable site. music which you can download to your FOMA terminal from i-motion sites that support i-motion.

  • Page 71: Osaifu-Keitai

    Osaifu-Keitai Osaifu-Keitai/ ToruCa Osaifu-Keitai is equipped with the IC card which enables you to make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.

  • Page 72: I-Concier

    i-concier Receiving Information When information arrives, When information arrives, blinks and the content “i-concier” works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data is displayed on the Stand- (area information about your neighborhood, Schedule, ToruCa, Phonebook, etc.) and sends you information, with by display.

  • Page 73: Convenient Tools

    Convenient Tools Using Alarm m from the Stand-by display Using Schedule ▶ ▶ Stationery Alarm m from the Stand-by ▶ display display Stationery Highlight an alarm and press Highlight an alarm and press ▶ Schedule Select a date to show a schedule Enter each item.
  • Page 74 QR code is one of the 2-dimensional codes that denotes data in the vertical Select the URL Select the URL and horizontal directions. ▶ Select “i-mode Browser” ⿠“株式会社NTTドコモ (NTT DOCOMO, ▶ Select “YES”. INC.)” is displayed when you scan the QR code with the FOMA terminal.

  • Page 75: Data Management

    If you do not have a microSD card, you need to purchase direction arrow. ⿠P-01C supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of September 2010).
  • Page 76 When you use the microSD card for the fi rst time, you need to format (initialize) it. ⿠Be sure to use P-01C for formatting. The microSD card formatted using other devices such as personal : A microSD card is inserted.
  • Page 77 ■ ■Displaying Data Stored on microSD Copying Data to microSD Card Card <Example> Copying a still image <Example> Displaying a still image m from the Stand-by display m from the Stand-by display ▶ ▶ Data box My picture ▶ ▶ ▶...

  • Page 78: Infrared Communication

    ■ Backing up Data to microSD Card Sending/Receiving Data by Infrared Communication/ iC Communication You can back up Phonebook entries, schedule events, ToDo items, messages, text memos, bookmarks, and You can send or receive data such as Phonebook the settings on and information about your FOMA entries to or from a device supporting infrared terminal collectively onto the microSD card.
  • Page 79 ■Sending Data Connecting to a PC ⿠For infrared communications, set the receiving end terminal You can connect the FOMA terminal to a personal fi rst, and then start sending data within 30 seconds. computer to exchange WMA fi les, images or other fi les stored on microSD card.

  • Page 80: Support

    Support Charging Cannot charge. (The Call/Charging indicator does not light, or it fl ickers.) Troubleshooting …Make sure the battery pack is attached to the FOMA terminal correctly. (See page 17) ⿠First of all, check to see if you need to update the …Make sure the power plug of the adapter is securely inserted into software program and then update it if necessary.
  • Page 81 The usable time of the battery is short. Cannot talk. …Make sure not to leave the FOMA terminal out-of-service-area for (“ ” does not disappear even if you move to another place. a long time. If your FOMA terminal is left out-of-service area, it You cannot make or receive a call, though the radio wave searches for radio waves to establish communications, consuming conditions are not bad.)
  • Page 82 ■In warranty period Warranty and After-sales Service ・ Your FOMA terminal is repaired charge free in accordance with ■Warranty the terms of warranty. ・ Make sure that you bring the warranty card to the counter for ⿠Make sure that you have received a warranty card provided at repair.
  • Page 83 ◎Other points to note i-mode Fault Diagnosis Site ⿠Make sure not to modify the FOMA terminal or its accessories. ・ We might reject to repair depending on the degrees of your You can check on your FOMA terminal whether modification. The following might be regarded as modifications: sending/receiving mail messages, downloading ・...
  • Page 84 Updating Software This function is to check whether you need to update software programs in the FOMA terminal by connecting to the network, and if necessary, you can download some parts of software programs using packet communication, and can update the software programs. If you need to update the software programs, the DOCOMO website and “お客様サポート...
  • Page 85 ■ ■Start Software Update from Menu Start Software Update from Icon m from the Stand-by display Select “Update notifi cation icon” on the Select “Update notifi cation icon” on the Stand-by display. Stand-by display. ▶ ▶ Set./Service Other settings ▶ Software update Enter your Terminal Enter your Terminal...
  • Page 86 Check Harmful Data You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. ⿠This scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages.
  • Page 87 ※3 Use it in Japan only. ※4 Earphone Plug Adapter P001 and Earphone Plug Adapter for External connector terminal 01 are required. ※5 Earphone Plug Adapter for External connector terminal 01 is required. ※6 To use/charge the P-01C, FOMA In-Car Hands-Free Cable 01 is required.

  • Page 88: Appendix

    Appendix Receive option setting Attachment preference Auto-start attachment Function List Address/Spam Mail set. Execute “Resetting the Function Settings to Default” Mail settings Feel＊Mail on page 38 for the items indicated by to return to Auto save setting the respective defaults. Text predict Auto Deco-mail setting Inbox...
  • Page 89 Post blog Select ring tone ( i-mode Browser set. Ring volume ( Full Browser set. Keypad sound ( i-mode settings Common settings Sound Melody effect ( Check settings Headset usage setting ( Reset i-mode setting Mail/Msg. ring time ( Full Browser Home Charge sound Display setting ( Software list (phone)
  • Page 90 Hourly illumination Answer setting ( MUSIC illumination Setting when opened Illumination IC card illumination Record display set Check settings Disp. PH-book image Kisekae Set call/receive No. Incoming call i-concier Information disp. set. Ring time ( Self mode Info notice setting ( Lock all V.phone while packet Personal data lock...
  • Page 91 2in1 setting My picture ( Multi number MUSIC Music&Video Channel Arrival call act Set in-call arrival act i motion/Movie Remote access Melody ( Dual network My documents Kisekae Tool English guidance NW services Overseas NW search Machi-chara Overseas setting Chara-den Image Overseas service Additional service...
  • Page 92 Scan code Phone Bar code reader Add to phonebook Saved data Reading? Receive Ir data Receive Receive all Group? Refer microSD data Memory No.? microSD Backup/Restore Search phonebook Name? Phone number? Digicam mode Photo mode Mail address? Camera Movie mode 2-touch dial? Copy View photos...
  • Page 93 Alarm ( Reset channel setting Schedule ( Reset storage area User settings ToDo ( Reset TV settings Text memo ( Check TV settings Calculator ( IC card content Dictionary DCMX Common phrases ToruCa Phrase/own dict. Own dictionary IC card lock IC card lock set.
  • Page 94 Camera Number of Approx. 5,100,000 pixels effective pixels ■Handset Number of recording Approx. 5,000,000 pixels pixels (maximum) Model P-01C Recording Number of Approx. 2,100 max. (default) Dimensions (when closed) Height: Approx. 111 mm recordable still Width: Approx. 50 mm ※1 images Depth: Approx.
  • Page 95 Number of savable/ Function <Movie> registerable items File format (Extension) MP4, ASF (3gp, asf) Phonebook 1,000 ※1※3 Recordable time to P-01C Approx. 497 seconds max. Schedule 2,500 ※4 Recordable time to the microSD Approx. 180 minutes max. ※1※2 Mail Received mail 2,500 max.
  • Page 96 They recommend that if you are worried This model P-01C mobile phone complies with Japanese technical about your exposure then you can limit your usage or simply use a...
  • Page 97 Conformity can be found on http://panasonic.net/pmc/support/index.html. and at various positions, they all meet*** the EU requirements for RF ※The European RTTE approval of this product is limited to the use of the P-01C exposure. handset, Battery Pack and FOMA AC Adapter for Global use (100 to 240 V AC) The exposure standard for mobile phones employs a unit of measurement only.
  • Page 98 ■FCC RF Exposure Information ■Important Safety Information This model phone meets the U.S. government’s requirements for exposure AIRCRAFT to radio waves. Switch off your wireless device when boarding an aircraft or whenever you are Your wireless phone contains a radio transmitter and receiver. Your phone is instructed to do so by airline staff.
  • Page 99 “FOMA”, “i-mode”, “i-αppli”, and “Music&Video Channel” are ■Others trademarks or registered trademarks of NTT DOCOMO, INC. ⿠“Catch Phone (Call waiting service)” is a registered trademark of Nippon Telegraph ⿠This product contains NetFront Browser, NetFront Document and Telephone Corporation.
  • Page 100 ⿠FeliCa is a contactless IC card technology developed by Sony Corporation. ⿠Content providers are using the digital rights management technology for Windows FeliCa is a registered trademark of Sony Corporation. Media contained in this device (“WM-DRM”) to protect the integrity of their content ⿠This product contains software licensed complying with GNU General Public License (“Secure Content”) so that their intellectual property, including copyright, in such (GPL), GNU Lesser General Public License (LGPL), etc.

  • Page 101: Index

    Index Camera ........5, 58 Shooting still images/moving AC adapter ........18 Early warning “Area Mail” ... 51 pictures ........59 After-sales service ....... 80 Earphone ........4 Viewing still images/moving Alarm ..........71 Earpiece .......... 4 pictures after shooting ....59 Antenna ..........
  • Page 102 MUSIC player display ....66 Music&Video channel ....65 Holding ......... 39 Key lock ........37 Keypad sound ......30 Kisekae tool ......... 32 Navigation displays ..... 22 i-αppli ..........67 Network security code ....35 IC card lock ........37 Network services ......
  • Page 103 Picture album ....... 59 Screen memo ....... 56 Picture viewer ......59 Security codes ......35 Vibrator ......... 29 PIN1 code ........36 Security scan function Video ..........64 PIN1 code entry set ..... 36 (Scanning function) ..... 84 Video recording ......63 PIN2 code ........
  • Page 104 Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: ｉMenu お客様サポート (User support) お申込 ・ お手続き (Applications/Procedures) ▶ ▶ From i-mode 各種お申込 ・ お手続き (Respective applications/procedures) ▶...
  • Page 105 ● Please confi rm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site.
  • Page 106 AT Command List ............About Manual for PC Connection This manual gives you the explanations of details required for having data communication with your P-01C, and installing “FOMA communication configuration file”/“DOCOMO Connection Manager” within the CD-ROM on your personal computer assuming that you are using the one that comes with Windows 7.

  • Page 107: Data Communication Available From Foma Terminal

    You can exchange data files such as images, melody files, Phonebook entries and mail messages with another FOMA terminal or a personal computer. Infrared communication iC communication P-01C FOMA USB Cable with Charge Function 01/02 microSD card DOCOMO keitai datalink...

  • Page 108: Before Using Data Communication

    Information ≥The FOMA terminal does not support Remote Wakeup. ≥The FOMA terminal does not support the FAX communication. ≥You can perform data communications by connecting the FOMA terminal with DOCOMO’s PDA “sigmarion Ⅲ”. Before Using Data Communication Charge of Internet service provider To use the Internet, you need to pay the charge for the Internet service provider you use.
  • Page 109 The following hardware and software are required besides the FOMA terminal and personal computer: ・FOMA USB Cable with Charge Function 01/02 (option) or FOMA USB Cable (option) ・Provided “P-01C CD-ROM” Information ≥Use a dedicated FOMA USB Cable with Charge Function 01/02 or FOMA USB Cable. The USB cable for personal computers cannot be used because the shape of the connector differs.

  • Page 110: Setup Flow For Data Transfer (Obex™ Communication)

    When performing packet communication by connecting the FOMA terminal to your personal computer via the FOMA USB Cable with Charge Function 01/02, install the “FOMA communication configuration file” (driver) from the provided “P-01C CD-ROM” onto the personal computer. You are advised to install “DOCOMO Connection Manager” which enables you to easily set up the APN or dial-up for...
  • Page 111 Connecting PC and the FOMA Terminal The following steps explain how to connect the FOMA USB Cable with Charge Function 01/02 (option). Check the direction of the Connector terminal connector terminal of the FOMA External connector terminal, then straight insert the (Face up the engraved FOMA external connector of the FOMA...

  • Page 112: Installing Foma Communication Configuration File (Driver)

    ≥Operate as the user who has the PC administrator right. ≥End all the programs resident on your personal computer before installing the FOMA communication configuration file (driver). Start Windows, then set the provided “P-01C CD-ROM” into the personal computer. Click “データリンクソフト・各種設...
  • Page 113 For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “docomo SMART series P-01C” 1Click the “ハードウェア (Hardware)” tab. Confirm the installed driver names. Confirm that all driver names are displayed. ≥The COM port number varies depending on the personal...
  • Page 114 For Windows Vista, Windows XP “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Open “システムとメンテナンス (System and maintenance)”. <For Windows XP> “スタート (Start)”→Open “コントロールパネル (Control panel)” →“パフォーマンスとメンテナンス (Performance and maintenance)”→Open “システム (System)”. Open “ハードウェアとデバイスを表示 (Show hardwares and devices)” 1Click “続行 (Continue)”. <For Windows XP> Click the “ハードウェア...
  • Page 115 “FOMA communication configuration file” (driver), the “FOMA communication configuration file” (driver) may not be installed correctly. In that case, execute “P01C_un.exe” on “P-01C CD-ROM” to delete the “FOMA communication ※ configuration file” (driver), and then install the files again.

  • Page 116: Docomo Connection Manager

    DOCOMO Connection Manager “DOCOMO Connection Manager” is a convenient software program to perform flat-rate data communication and volume charging data communication. It enables you to sign up for “mopera U” and easily make PC settings according to your contract situation. It also enables you to check the estimate data traffic and usage amount with the charge counter function.

  • Page 117: Before Installing Docomo Connection Manager

    Before Installing DOCOMO Connection Manager Installation Flow Prepare the FOMA terminal and the FOMA USB Cable with Charge Function 01/02 (option) or the FOMA USB Cable (option). Check the service contents and the contract contents with Internet service provider. When a connection software program other than “DOCOMO Connection Manager” is installed, set it not to start automatically.

  • Page 118: Installing Docomo Connection Manager

    ≥End all the running application programs. End the programs resident on Windows including anti-virus software. (Example) Right click the icon appears on the task tray, and select “閉じる (Close)” or “終了 (Exit)” Set the provided “P-01C CD-ROM” into your personal computer. Click “インターネット接続  (Internet connection)”.
  • Page 119 Click “次へ (Next)”. Confirm the display precautions and click “次へ (Next)”. Confirm the licensing contract contents. If you agree with the contents, select “使用許諾契約の条 項に同意します (Agree with the licensing contract contents)” and click “次へ (Next)”. Confirm the installation destination folder, then click “次へ...
  • Page 120 Click “インストール (Install)”. Installation starts. Click “完了 (Finish)”. Installation is completed.

  • Page 121: Starting Docomo Connection Manager

    Starting DOCOMO Connection Manager “ [スタート (Start)]”1“すべてのプログラム (All programs)” 1“NTT DOCOMO” 1“ドコモ コネクションマネージャ (DOCOMO Connection Manager)” 1“ドコモ コネクションマネージャ (DOCOMO Connection Manager)” “DOCOMO Connection Manager” starts. When this is the first start-up, the setting wizard appears automatically. Hereafter, proceed operation/settings following the instruction of software to complete the preparation to access the Internet.

  • Page 122: Setting Dial-Up Network

    Setting Dial-up Network Set Packet Communication This section explains how to set up a connection for packet communication without using “DOCOMO Connection Manager”. The packet communication uses AT commands to carry out the settings from a personal computer. To specify settings, communication software to enter AT command is required. “Hyper Terminal”, which is attached to Windows as the standard software, is used here for explanation.
  • Page 123 Confirm COM Port Number To manually carry out the communication setting, you need to specify a COM port number, which is assigned to “FOMA P01C” (modem) embedded after you install the “FOMA communication configuration file” (driver). The confirmation method varies depending on the operating system of your personal computer.
  • Page 124 Open the “モデム (Modem)” tab, confirm the COM port number in the “接続先 (Access point)” field of “FOMA P01C”, then click “OK”. ≥The COM port number you confirmed is used to set an access point name (APN) (see page 19). ≥The contents on the property display and COM port number vary depending on your personal computer.
  • Page 125 Set an Access Point Name (APN) This section explains how to set an access point name (APN) for packet communication. You can register up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 21). When using “mopera U”...
  • Page 126 Select a connection method. <When you can select the COM port number of “FOMA P01C”> Select the COM port number with which you install the “FOMA P01C” in the “接続方法 (Connection method)” field, then click “OK”. Then, go to step 6. ≥Here, “COM3”...
  • Page 127 Confirm that “OK” appears on the display. “ファイル (File)” menu1Select “ハイパーターミナルの終了 (Exit Hyper Terminal)” to exit Hyper Terminal. ≥If the message “現在、接続されています。切断してもよろしいですか? (Currently connected. Do you want to disconnect this line?”) appears, select “はい (Yes)”. ≥The message “セッションXXXを保存しますか? (Do you want to save session XXX?)” then appears. You do not need to especially save that session.
  • Page 128 Set Caller ID Notified/Not Notified For packet communication, you can specify whether to notify your caller ID (caller ID notified/not notified). The caller ID is your important information; so, take a great care to notify your caller ID. You can use AT commands (¢DGPIR command) to specify “caller ID notified/not notified”...
  • Page 129 Set Dial-up Network for Windows 7 “ [スタート (Start)]” 1Open “コントロールパネル (Control panel)” 1“インターネットへの接続 (Connection to Internet)” 1Click “ダイヤルアップ接続 (Dial-up connection)”. ≥After the access point has been set, the confirmation display appears asking whether the existing connection is to be used.
  • Page 130 Highlight the access point which is finished with setting, and select “プロパティ (Property)” after the right click 1Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P01C” is checked in the “接続の方法...
  • Page 131 Set Dial-up Network for Windows Vista “ [スタート (Start)]”1“接続先 (Access point)”1Click “接続または ネットワークをセットアップします (Setup the connection or network)”. Select “ダイヤルアップ接続を セットアップします (Setup the dial-up connection)”, then click “次へ (Next)”. If the display for selecting a modem appears, click “FOMA P01C”. ≥The display for selecting a modem appears only when you have registered two or more modems.
  • Page 132 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P01C” is checked in the “接続の方法 (Connection method)” field. If it is not checked, check it. If two or more modems are checked, click the button to position the priority level of “モデム...
  • Page 133 Set Dial-up Network for Windows XP “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “新しい接続ウィザード (New connection wizard)”. When the “新しい接続ウィザード (New connection wizard)” display appears, click “次へ (Next)”. Select “インターネットに接続する (Connect to the Internet)”, then click “次へ (Next)”. Select “接続を手動でセットアップする (Manually set up the connection)”, then click “次へ...
  • Page 134 Enter an access point number in the “電話番号 (Phone number)” field, then click “次へ (Next)”. ≥When connecting to “mopera U”, enter “¢99¢¢¢3#” as the access point number. See page 21 for access point numbers other than “mopera U”. Enter the user name and password supplied from your Internet service provider or network administrator in the...
  • Page 135 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P01C” is checked in the “接続方法 (Connection method)” field. If it is not checked, check it. If two or more modems are checked, click the button to position the priority level of “モデム...

  • Page 136: Making Dial-Up Connection

    Making Dial-up Connection Making Dial-up Connection for Windows 7 Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Click “インターネットへの接続 (Connection to Internet)”. Check “はい、既存の接続を選びま す (Yes, I choose the existing connection)”, then select the access point, and click “次へ...
  • Page 137 Making Dial-up Connection for Windows Vista Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “接続先 (Access point)”. Select access point and click “接続 (Connect)”. Confirm the contents and click “ダイヤル (Dial)”. ≥When connecting to “mopera U”...
  • Page 138 Making Dial-up Connection for Windows XP Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “ネットワーク接続 (Network connection)”. Open the access point to be used. Select the access point icon of the ISP name (see page 27) you specified in “Set Dial-up Network”, then “ネットワークタ...
  • Page 139 Your personal computer ･ Confirm whether your personal computer satisfies the operating environment (see page 3). cannot recognize “P-01C” ･ Confirm whether “FOMA communication configuration file” (driver) is installed in your personal computer. ･ Confirm whether the FOMA terminal is connected to your personal computer and powered on.

  • Page 140: At Command

    AT Command AT commands are used to specify and modify the functions of the FOMA terminal through the personal computer. ※The following abbreviations are used in the AT command list: [AT]: Commands which are available at the FOMA P01C Command Port. [M]: Commands which are available in the FOMA P01C (modem).

  • Page 141: At Command List

    AT Command List Command execution AT command Outline Parameter/Explanation example Re-executes the last executed − command. No carriage return is required. AT%V Displays the version of the AT%V − FOMA terminal. Ver1.00 AT&Cn Selects the operating conditions n=0: CD is always ON. AT&C1 of the circuit CD signal sent to n=1: CD varies according to the carrier of the other...
  • Page 142 Command execution AT command Outline Parameter/Explanation example AT¢DGPIR=n This command is valid at dialing/ n=0: Uses the APN as it is. (default) AT¢DGPIR=0 receiving calls. n=1: Adds “184” to the APN. (always not notify) In the dial-up network setting, n=2: Adds “186” to the APN. (always notify) AT¢DGPIR? you can add “186”...
  • Page 143 Command execution AT command Outline Parameter/Explanation example AT+CGREG=n Sets whether the network n=0: Not notified. (default) AT+CGREG=1 registration state is notified. n=1: Notified at switching between the inside and Displays whether you are inside outside of the service area. (set to “Notified”) or outside the service area (Inquiry) AT+CGREG?
  • Page 144 Command execution AT command Outline Parameter/Explanation example AT+COPS=n,2,m Selects the carrier to be n=0: Automatic (searches the network and switches the AT+COPS=1,2,"44F001" connected. network operator automatically) (default) n=1: Manual (connects to the network operator specified in “m”) n=2: Disconnects the connection to the network operator n=3: Mapping is not performed.
  • Page 145 AT+GMI Displays the manufacturer name AT+GMI − (Panasonic). Panasonic AT+GMM Displays the product name AT+GMM − (FOMA P-01C) of the FOMA FOMA P01C terminal. AT+GMR Displays the version of the AT+GMR − FOMA terminal. Ver1.00 AT+IFC=n,m Selects the flow control method. n: DCE by DTE...
  • Page 146 Command execution AT command Outline Parameter/Explanation example ATIn Displays the ID code. n=0: Displays “NTT DoCoMo”. ATI0 n=1: Displays the product name. (same as +GMM) NTT DoCoMo n=2: Displays the version of the FOMA terminal. (same as +GMR) ATI1 n=3: Displays ACMP information element.
  • Page 147 Command execution AT command Outline Parameter/Explanation example ATZn Resets the setting to the Only n=0 is specifiable. (Can be omitted) (In online) contents of the nonvolatile memory. If this command is NO CARRIER entered during communication, (In offline) the line is disconnected. AT¥Sn Displays the contents of the each Only n=0 is specifiable.
  • Page 148 ≥Command name: +CGEQMIN=[parameter] ･ Outline This command registers the reference value to judge whether the system permits QoS (Quality of service) reported from the network at establishment of the packet communication. You can specify four setting patterns described in the command execution example below. ･...
  • Page 149 Disconnection Reason List ■64K Data Communication Value Reason The specified number does not exist. The line was normally disconnected. Cannot communicate because the other party is communicating. Dialed but no response has come in within the specified duration. Cannot communicate because the other party is dialing. The other party rejected to receive the call.
  • Page 150 For &E1 Numeric Character notation Connection speed notation CONNECT 1200 1,200bps CONNECT 2400 2,400bps CONNECT 4800 4,800bps CONNECT 7200 7,200bps CONNECT 9600 9,600bps CONNECT 14400 14,400bps CONNECT 19200 19,200bps CONNECT 38400 38,400bps CONNECT 57600 57,600bps CONNECT 115200 115,200bps CONNECT 230400 230,400bps CONNECT 460800 460,800bps...
  • Page 151 P-01C Kuten Code List...
  • Page 152 <How to read Kuten Code List> First enter the number for “Kuten digit 1 to 3”, and enter the number for “Kuten digit 4”. ≥Some characters in Kuten Code List may appear different on the display. Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit...
  • Page 153 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 讃 賛 酸 餐 斬 暫 残 【 た 】 函 箱 硲 箸 肇 筈 櫨 幡 肌 【...
  • Page 154 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 揚 揺 擁 曜 楊 様 洋 溶 熔 用 圷 圸 坎 圻 址 坏 坩 埀 垈 坡 椢...
  • Page 155 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 竊 竍 竏 竕 竓 站 竚 竝 竡 竢 誨 誡 誑 誥 誦 誚 誣 諄 諍 諂 鷯...

This manual is also suitable for:

Smart series

Table of Contents