NTT docomo STYLE Series Instruction Manual page 116

■ Checking registered other party's phone number
1
In the save list screen, select a name/C.
Enabling Accept/Reject calls
1
In the Custom menu, select
[Security]/[Accept/Reject calls]/enter the
terminal security code/t.
2
Select an item/t/[ON].
Reject calls by reason of non-disclosure
Rejecting a call with no caller ID
Set the handset to reject calls when caller ID is not sent,
depending on reason.
The following are the types of non-disclosure reason. For details
nP. 59
User unset
Calls received from a caller who is set to be rejected due to a
non-disclosure reason will not be connected. Calls of other
non-disclosure reasons will be connected. Rejected callers hear a
busy signal. The stock icon B (missed call) appears, and the
reason of non-disclosure is recorded in Received calls.
It is recommended to also set the Caller ID Request Service.
Reject calls by reason of non-disclosure cannot be set for numbers
set to Accept calls.
Also when Reject unknown is set, Reject calls by reason of
non-disclosure is prioritized for calls with no caller ID.
Reject calls by reason of non-disclosure is prioritized when set with
the Public mode (Drive mode).
SMS and i-mode mail are received normally regardless of the
setting of this function.
114
[Settings]/
Payphone Unavailable
1
In the Custom menu, select
[Security]/[Accept/Reject calls]/enter the
terminal security code/t.
2
Select a reason/t.
3
Select the setting/t.
Set mute ring time
Muting ring tone for a caller unset in
phonebook
Set a ring tone to sound after a set number of seconds when
receiving a call from the caller not in the phonebook.
This is one way to avoid a nuisance call such as one-ring phone
scam.
Reject unknown cannot be set simultaneously with Set mute ring
time.
The Public mode (Drive mode) is prioritized when set with Set mute
ring time.
When setting the mute ring time, set whether to record calls
disconnected during the mute ring time duration in Received calls.
1
In the Custom menu, select [Settings]/[Snd/
Vibrator/Manner]/[Set mute ring time]/[ON].
: When [OFF] is set, the operation is completed.
2
Enter the mute ring time/t.
3
Select the setting/t.
Set the mute ring time shorter than the ring duration for Record
message or Voice Mail Service to prioritize Set mute ring time.
Set mute ring time is activated for calls from callers in the
phonebook while All lock or Omakase Lock is set or while Function
lock is applied to the Phonebook.
[Settings]/