NTT docomo STYLE Series Instruction Manual page 305

The aspect ratio is maintained when a still picture is resized. For
images with differing aspect ratios, use Trimming to use as icons
or Videophone substitute images.
Still picture is enlarged or reduced. When changing the size to
Icon: 152×152, still picture is centered and margins are added to
top and bottom (left and right) if height (width) is less than screen
size.
When the confirmation message appears stating that the image is
reduced if changing the size to [Deco-mail], select [Yes] to change
the size.
Rotating still pictures
1
In the image editing screen, select [rotate].
2
Select the type/t.
: To save a still picture nP. 302
When the image size is larger than 960×1280, the confirmation
message appears stating that the image is reduced. Select [Yes]
to enable rotation.
When still pictures which horizontal and vertical size are different
are rotated 90º, the aspect ratio changes for sizes.
Depending on the still picture, it may not be possible to specify a
save folder.
Adding various effects
Change hue or feel of still pictures.
1
In the image editing screen, select [effect]/[Image
effect].
2
Select the type/t.
: To save a still picture nP. 302
<Rotate>
<Image effect>
Decorating faces
<Face effects>
Add expressive effects to one's face.
1
In the image editing screen, select [effect]/[Face
effects].
2
Select the type/t.
: To save a still picture nP. 302
Effects may vary depending on the position and size of face in still
picture. Use forward-facing portraits with large and centered face
for Face effects.
When facial contours are not properly extracted nP. 304
Correcting still pictures
Correct sharpness and softness of still pictures.
1
In the image editing screen, select [correct].
2
Select the type/t.
: To save a still picture nP. 302
Pasting image stamps
1
In the image editing screen, select
[Image stamp].
2
Select a stamp/i.
3
Adjust the location to paste with w/t/i.
: To save a still picture nP. 302
Pasting face stamps
<Face stamp>
1
In the image editing screen, select [stamp]/[Face
stamp].
2
Select the type/t.
: To save a still picture nP. 302
<Correct image>
<Image stamp>
[stamp]/
Continued on next page
303