NTT docomo STYLE Series Instruction Manual page 249

■ Setting whether to display battery icon
This is available for i-appli that is displayed in full-screen.
1
In the Custom menu, select [i-appli]/[Battery
icon].
2
Select the setting/t.
■ Setting Power saver of i-appli
1
In the Custom menu, select [i-appli]/[Power saver
set]/[ON].
2
Select the time before activating the Power saver
mode/t.
When the display turns off according to Light/Power saver
(nP. 93) while i-appli is running, the i-appli is paused after the
set time passes, and the battery power can be conserved.
While the following operations are performed, the Power saver
mode of i-appli is not activated. After the operations end and the
set time passes, the Power saver mode of i-appli is activated.
Packet transmission from i-appli
Access from i-appli to the microSD Card
To resume the software in the Power saver mode of i-appli, press
a key and select [Agree] in the confirmation screen.
In i-appli stand-by, activate i-appli so that it is run in the Power
saver mode.
Setting Program guide i-appli started from 1Seg
■
<Program guide key>
1
In the software list screen, select
[Program guide key]/[Yes].
<Battery icon>
<Power saver set>
software/C/
Setting operating conditions for i-appli
<Set software use>
Set the following operating conditions for each software.
Network set Set whether data can be transmitted while
i-appli is running.
i-appli To Set whether to start i-appli with i-appli To.
Icon info set Set whether software should be notified
regarding icons indicating unread mail and
Message R/F, battery level, Manner mode
setting and whether the handset is inside or
outside the service area, while i-appli is
running.
To allow ring tone/ Set whether to allow the i-appli to change the
image/icon ring tone and screen.
changes by
software
To show When [Allow ring tone/image/icon changes
confirmation screen by software] is set to [Yes], set whether to
by all changes show the confirmation screen when settings
are changed.
To access to phone- Set whether to allow the i-appli to access the
book/call records phonebook or Redial/Received calls.
by software
Location usage Set whether to use location information for
setting GPS compatible i-appli.
Some settings are not available depending on the software.
1
In the software list screen, select
[Set software use].
2
Select a field to set/t.
3
Select the setting/t.
: To set other operating conditions continuously: Repeat steps 2
and 3.
software/C/
Continued on next page
247