NTT docomo STYLE Series Instruction Manual page 281

: To cancel position location: Press i/t.
2
Select a usage.
;
Select [Read a Map]/[OK].
• Check peripheral area information using "iエリア (周辺情報)"
(i-area (peripheral area information)) after displaying a map.
Refer to the DOCOMO website for "iエリア (周辺情報)"
service.
• Appears when activating from menu.
; *
Select [Run req i-appli]
• GPS compatible i-appli set in Register MAP key is activated.
• Appears when pressing { for 1+ seconds to activate.
*
; /select i-appli/t.
Select [Run i-appli]
;
Select [Paste to mail]/[OK]/compose and send a mail.
• The Location URL to be sent appears only on the i-mode
supported terminal.
;
Select [Add to phonebook]/add to the phonebook.
;
Select [Attach to image]/select an image/t/C/select
the saving method/t.
* The present location cannot be displayed with some GPS
compatible i-appli.
: To check the location information: Press i.
Set position loc.
Setting position location
Setting GPS button
<GPS button setting>
Set the operation that is automatically launched after positioning the
present location by pressing { for 1+ seconds.
1
In the Custom menu, select [LifeKit]/[GPS
menu]/[Set position loc.]/[GPS button setting].
2
Select the action/t/[OK].
.
Setting Positioning mode for positioning
location
<Positioning mode>
1
In the Custom menu, select [LifeKit]/[GPS
menu]/[Set position loc.]/[Positioning mode].
2
Select the Positioning mode/t/[OK].
: When [Quality mode] is selected, the positioning is performed
with longer time. As a result, more accurate positioning is
performed than in the Standard mode.
Using GPS compatible i-appli
Start i-appli compatible with Map/GPS function.
When GPS compatible i-appli is used, location information is sent
to the information provider of the software used.
When GPS function is used on GPS compatible i-appli, set
Location usage setting of the software used to [Send].
1
In the Custom menu, select [LifeKit]/[GPS
menu]/[i-appli].
2
Select software/t.
The present location cannot be displayed with some GPS
compatible i-appli.
Activating GPS compatible i-appli by one-touch
operation
1
In stand-by, press {.
: Register to MAP key in advance, and set GPS compatible
i-appli to activate.
: By default, the FOMA terminal is set to activate "Mapping appli".
For details on operating "Mapping appli" nP. 280
279