NTT docomo STYLE Series Instruction Manual page 250

4
Press i.
Network set
Software may not function properly and information may not be
available in a timely manner if Network set is set to [No]. This may
also prevent some software from starting.
Because images used with i-appli and entered data are sent via
the Internet, some of these information may be viewed by a third
party ("Images used with i-appli" include images shot using the
camera function operated with i-appli, images acquired using the
Ir communication function operated with i-appli, and images
viewed and retrieved from Data box operated with i-appli).
i-appli To setting
The software to start is determined by the site, i-mode mail,
Message R/F, screen memo or ToruCa. Download the specified
software in advance.
Icon information setting
The software requires icon information may not function properly if
set to [No].
If Icon information setting is set to [Yes], the icon status for unread
mail/Message R/F, battery level, the Manner mode, and inside/
outside the service area may be sent via the Internet to the IP
(Information Provider) along with "terminal ID and UIM ID", and
this information may be viewed by a third party.
Phonebook and history access by software
Setting this to [No] may prevent operation of some i-appli.
248
Motion tracking compatible appli
The FOMA terminal supports "Motion tracking" to operate i-appli (by
tilting and shaking (or swinging) the FOMA terminal) through the
recognition technology of the camera.
Motion tracking may not be used in the following cases.
When the lens of the camera is dirty
When the clothes are similar to the background
When the background is not stable such as while moving
When in the dark or too bright place
Warning
Operate the Motion tracking compatible appli by tilting and shaking
(or swinging) the FOMA terminal.
The mobile phone may hit people or objects, if shaken (or swung)
too much, and cause an accident or a damage.
When operating, hold the FOMA terminal securely, do not swing it
around more than necessary and confirm the safety of surroundings.
Motion tracking compatible appli detects movements using a
camera. Do not cover the camera with fingers while operating.
Starting other software while software is
running
Some software allow other software to start without returning to the
software list.
If the software to start is not specified, follow the instructions on the
screen to select the software.
If the software to start is not saved in the FOMA terminal, download
the software.
Default software
To use again after deleting, download preset software from the
iMenu site, [SH-MODE] (nP. 119).