NTT docomo STYLE Series Instruction Manual page 450

When updating software, information about the FOMA terminal
(model, serial number, etc.) is automatically sent to the server
(DOCOMO software update server). Sent information is only used
for software update.
If software update fails, [Rewrite failed] appears and all operations
are not available. In this case, bring the FOMA terminal to a repair
center that DOCOMO specifies.
Updating of software is not available overseas.
During software update, Reception reserve alarm and Recording
reserve alarm are not activated. In addition, watching or recording
does not start.
Updating software automatically
The new version of software is automatically downloaded, and the
software is rewritten on the time set in advance.
When the software becomes ready to be rewritten, the stock icon 6
(Update required) appears to confirm the time when the rewrite starts,
the time to rewrite can be changed, and whether to rewrite now can be
selected.
448
■ Setting auto-update date and time
1
In the Custom menu, select [Settings]/[General
settings]/[Software update]/enter the terminal
security code/t/[Set auto-update].
<Set auto-update>
2
Select the [Set auto-update]
[auto-update].
: To not set: Select [disable]/i/[Yes].
: If the notification icon appears in stand-by when software must
3
Select the [Day] field/t/select day of
t.
4
Select the [Time] field/t/enter the
i.
If software update cannot be activated at the automatic update
time, the stock icon 6 (Update required) appears in stand-by.
be updated: Select [only notification]/i.
field/t/
week/
time/t/