NTT docomo STYLE Series Instruction Manual page 524

Reasons for disconnection
■ Packet transmission
Value
27 Host (APN) does not exist, or was incorrect.
30 Disconnected by network.
33 No packet transmission subscription.
36 Disconnected properly.
64K data communication
■
Value
1 Specified number does not exist.
16 Disconnected properly.
17 Line busy.
18 Number was dialed, but no response received
within specified time.
19 Dialed number is making a call.
21 Dialed number refused incoming call.
63 Network service or option is not valid.
65 Transmission capacity not provided was
specified.
88 Dialed number of terminal with different terminal
attribute, or call was received.
Error reports
Numerical
Text display
display
10 SIM not inserted FOMA card not inserted.
15 SIM wrong
16 incorrect
password
100 unknown
Reason
Reason
Reason
A non-DOCOMO SIM (IC
card equivalent to FOMA
card) is inserted.
Password is incorrect.
Unknown error occurred.
More on AT commands
Command name: +CGDCONT=
■
[parameter]
Overview
Sets host (APN) accessed when establishing
packet transmission.
Not stored in FOMA terminal's memory with AT&W
commands. Not reset with AT&F or ATZ commands.
Syntax
+CGDCONT=[<cid>[,"<PDP_type>"[,"<APN>"]]]o
Parameter description
*
<cid> : 1 to 10
*
<PDP_type> : PPP or IP
*
<APN> : Optional
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. It can be set between 1 and 10 in
the FOMA terminal. The default settings are
mopera.ne.jp for <cid>=1 (<PDP_type> is
"PPP") and mopera.net for <cid>=3
(<PDP_type> is "IP"). Set cid in 2 or 4 to 10.
<APN> is a user-specified character string for
each connection, indicating the host.
Execution example
Command when registering host (APN) name
"abc" (for <cid>=2)
AT+CGDCONT=2,"PPP","abc"o
OK
Operation when parameter is abbreviated
AT+CGDCONT=
Clears all <cid> settings. Resets <cid>=1 or 3
setting to default value.
AT+CGDCONT=<cid>
Clears specified <cid> setting. Resets <cid>=1 or
3 setting to default value.
AT+CGDCONT=?
Displays list of values that can be set.
AT+CGDCONT?
Displays current settings.
31