NTT docomo STYLE Series Instruction Manual page 188

Before using camera
Precautions for using camera
Fingerprints or oil on the lens may cause the image to be out of
focus. In addition, images may blur and rays of light may appear in
images when shot near a strong light source. Wipe the lens with a
soft cloth before shooting images.
Shoot when battery level is sufficient. Images may appear dark and
distorted when shot with insufficient battery power even while the
handset is charging. Do not shoot images while charging.
Although the cameras are made with high-precision technology,
some pixels or lines look constantly dark or bright. Further, white
lines and other noise may appear in images especially when
shooting images in dimly lit surroundings.
The quality of images may deteriorate when shot or saved after the
FOMA terminal has been left in a warm location for a long time.
If the camera lens is exposed to direct sunlight for a long time, the
internal color filter may discolor, creating a discoloration of shot
images.
Images shot of the sun, a light or other strong light source may
appear dark and distorted.
Direct images shot of the sun may damage the performance of the
CMOS.
The FOMA terminal may become warm after shooting still pictures
continuously or shooting long movies. This is not a malfunction.
When the AF mode is switched, sounds may be heard from the
camera lens. This is not a malfunction.
Images are blurred when the FOMA terminal moves while shooting
images. Hold firmly to prevent blurring. Use the Fix camera shake
function to prevent camera shake when shooting still pictures and
movies.
The color and brightness of the subject in images shot with the
camera may differ from the actual color and brightness.
186
Make sure that your fingers, hair and handset strap do not obscure
the camera lens when shooting images.
Because a larger image size requires more data, movement in the
image on the FOMA terminal display may appear slow.
Indoor fluorescent lighting may create flickering or streaky shading
on the screen. This flickering or shading may be reduced by
changing the lighting conditions, brightness or adjusting the camera
brightness and White balance.
Performance while using camera
Shot still pictures are saved to the [Camera] folder in My picture of
Data box, and shot movies are saved to the [Camera] folder in
i-motion of Data box. Data can also be saved to the microSD Card
(nP. 314).
When activating still pictures shooting, movies shooting, Card
reader, Cameraloupe, or Shotdeco, the picture light illuminates.
To end the Camera mode, close the FOMA terminal or press H or
c with the viewfinder display shown in each Camera mode.
In each Camera mode, if no operations are performed for
approximately 2 minutes with the viewfinder display shown, the
Camera mode automatically ends and the stand-by display
reappears. The Camera mode does not end if there are unsaved
data, or when the Submenu, Shooting settings screen or scan
results screen is shown.
Shutter sound, shooting start/end sound, completion
sound, Focus lock sound, and auto timer sound
For still pictures shooting, movies shooting, Cameraloupe or
Shotdeco, sounds are enabled regardless of the FOMA terminal
settings.
For the Character reader and Bar code reader, sound volume
follows the voice call ring volume. Also, sound are disabled in the
following cases.
While the Manner mode is set
While the Public mode (Drive mode) is set