NTT docomo STYLE Series Instruction Manual page 452

: When updating software, information about FOMA terminal
(model, serial number, etc.) is automatically sent to the server
(DOCOMO software update server). Sent information is only
used for software update.
Starting from menu
■
1
In the Custom menu, select [Settings]/[General
settings]/[Software update].
2
Enter the terminal security code/t/[Update].
: Start check of whether software update is necessary.
: For subsequent operations nstep 3 of "Starting from stock
icon" on P. 449
Updating software immediately
1
Select [Now update]/t/start download.
: Approximately 5 seconds after [Now update] is selected,
download will start automatically.
: Once the download starts, software is automatically updated
without selecting menus.
: If the download is canceled during download, data downloaded
up to that point is deleted.
: For Reserve, [Establishing SSL session (Authenticating)] b
[Negotiating] appears.
450
2
<Now update>
3
4
Upon the completion of download, [Ready to
rewrite?] appears/t.
: Approximately 5 seconds after [Ready to rewrite?] appears,
rewriting starts automatically.
: During rewriting, all of the keys are disabled. It is not possible to
cancel rewriting. Also, calls cannot be received while rewriting is
being performed.
: Upon the completion of rewriting, the power is automatically
turned off, and then back on again.
When power is turned on, software update starts
automatically.
: During update, all of the keys are disabled. It is not possible to
cancel update. Also, calls cannot be received while update is
being performed.
: Approximately 5 seconds after the completion of updating, the
power is automatically turned off, and then back on again.
[Your update is complete] appears/t.
: Software update ends and the stand-by display appears.