NTT docomo STYLE Series Instruction Manual page 107

The PIN1 code is a four- to eight-digit security code that is entered
when the FOMA terminal is turned on or when a FOMA card is
inserted to prevent unauthorized use by a third party. Enter the PIN1
code to enable making/receiving calls and operating the handset. The
PIN2 code is four- to eight-digit security code that is entered for
performing operations such as applying for or using Client certificates,
or resetting total cost.
Use the previously set PIN1 and PIN2 codes when inserting an old
FOMA card into a newly purchased FOMA terminal.
PUK
PUK is an eight-digit number used to disable the PIN1/PIN2 code lock.
PUK cannot be changed by the user.
If PUK is incorrectly entered a total of ten times continuously, the
FOMA card is completely locked.
Secure when the power is
turned on
Enter the PIN1 code
If incorrectly
entered three times
continuously
Enter PUK
OK
Set a new PIN code
• Client certificate operations
• Access a FirstPass
compatible site
Enter the PIN2 code
If incorrectly
entered ten times
continuously
Contact a docomo Shop
Change security code
Changing terminal security code
Change the terminal security code (four to eight digits).
1
In the Custom menu, select
[Security]/[Change security code]/enter the
current terminal security code/t.
2
Enter the new terminal security code/t/enter
the new terminal security code again/t.
UIM Settings
Setting PIN code
Setting handset to require PIN1 code entry at
power on
<PIN1 code input set>
1
In the Custom menu, select
[Security]/[UIM Settings]/enter the terminal
security code/t/[PIN1 code input set].
2
Select the setting/t.
3
Enter the PIN1 code/t.
Entering PIN1 code at power on
■
Set the PIN1 code input set to [ON], and the PIN1 code entry screen
appears when the power is turned on.
1
In the PIN1 code entry screen, enter the PIN1
code/t.
[Settings]/
[Settings]/
105