Setting An Image To Send - NTT docomo STYLE Series Instruction Manual

1
While sending Chara-den as a
substitute image, press
[Chara-den set]/[Action list].
: Alternatively, press m or p (for 1+
seconds) to display the action list.
2
Select an action/t.
: To end the action: Press 0.
: To display details: Select an action/i.

Setting an image to send

The following images can be sent during a Videophone call.
Use JPEG or GIF images saved in My picture of Data box that are
set to QCIF: 176×144. However, animated GIFs are not available.
Still pictures that are restricted for output from the FOMA terminal
are not available. Still pictures shot with the FOMA terminal are
available regardless of the File restriction (Picture memo is not
available).
Changing an image to send during a call
<Change send img>
Change the image to send during a Videophone call.
Images set by Change send img are disabled when a Videophone
ends.
1
During a Videophone call, press C/[Change send
img].
: Press i during a Videophone call to switch between My side
and a substitute image.
2
Select the image to send.
;
Select [My side] (to switch to a camera image).
;
Select [Substitute image]/select a still picture/i.
68
C/
;
Select [Chara-den]/select Chara-den/i.
;
Select [File playback]/select a still picture/i.
Still pictures saved onto a microSD Card are not available directly.
Copy to the FOMA terminal handset in advance.
Pausing your camera image to send an image
<Pause>
1
While sending a camera image, press C/[Change
send img]/[Self-portrait]/[Pause].
: To disable Pause: Press i/c.
A paused camera image can be sent.
During the pause, your image is sent to the other party with
[Stopped] superimposed.
When a Videophone call ends, the setting is reset.
Zooming in and zooming out
1
While sending a camera image, press r/q.
2
Adjust the zoom with v.
: For the maximum zoom/minimum zoom: Press a/m.
Set up to 24 zoom levels for main camera and 2 zoom levels for
sub camera.