Pos : 589 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P728 – Netzs pannung @ 0\mod_1328173378202_388.doc x @ 12985 @ @ 1

Input voltage

P728

(mains voltage)

0 ... 1000 V

Displays the actual mains voltage at the FI input. This is directly determined from the amount of

the intermediate circuit voltage

Pos : 590 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P728 – Netzs pannung _ Statischer Betrag bei 24 V Geräten [SK 2xxE, SK 2xxE-FD S] @ 5\mod_1397203354385_388.doc x @ 126288 @ @ 1

In devices with a separate 24 V supply, a static value is displayed if no mains voltage is

present (e.g.: with 1~ 230 V devices: P728 = 230 V). This value is used for internal initialisation

purposes.

Pos : 591 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P729 – Drehmoment @ 0\mod_1328173426559_388.doc x @ 13008 @ @ 1

Torque

P729

(Torque)

-400 ... 400 %

Displays the actual calculated torque. Basis for calculation are the motor data P201...P209.

Pos : 592 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P730 – Fel d @ 0\mod_1328173473274_388.doc x @ 13031 @ @ 1

Field

P730

(Field)

0 ... 100 %

Displays the actual field in the motor calculated by the FI. The basis for calculation are the motor

data P201...P209.

Pos : 593 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P731 – Aktueller Parametersatz @ 0\mod_1328173520271_388.doc x @ 13054 @ @ 1

Parameter set

P731

(Actual parameter set)

0 ... 3

Shows the actual operating parameter set.

Pos : 594 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P732 – Strom Phas e U @ 0\mod_1328173601208_388.doc x @ 13077 @ @ 1

Phase U current

P732

(U phase current)

0.0 ... 999.9 A

Displays the actual U phase current.

NOTE:

This value can deviate somewhat from the value in P719, due to the measurement procedure

used, even with symmetrical output currents.

Pos : 595 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P733 – Strom Phas e V @ 0\mod_1328173830046_388.doc x @ 13100 @ @ 1

Phase V current

P733

(V phase current)

0.0 ... 999.9 A

Displays the actual V phase current.

NOTE:

This value can deviate somewhat from the value in P719, due to the measurement procedure

used, even with symmetrical output currents.

Pos : 596 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265495 @ @ 1

214

Information

0 = Parameter set 1