Commissioning Examples; 2X0E - Minimal Configuration - Nord Drivesystems NORDAC FLEX SK 200E Series User Manual

Pos : 246 /Anleitungen/El ektr oni k/FU und Starter/4. Inbetriebnahme/SK 1xxE, SK 2xxE, -FD S/Inbetriebnahme Gerät/Inbetriebnahmebeispi ele [SK 1x0E, SK 2xxE] @ 1\mod_1343222512142_388.doc x @ 37573 @ 3 @ 1

4.3.4 Commissioning examples

All SK 2xxE models can be operated as delivered. Standard motor data for a 4-pole standard
asynchronous motor of the same power is parameterised. The PTC input must be bypassed, if a
motor with PTC is not available. Parameter (P428) must be changed if an automatic startup with
"Mains On" is required.
Pos : 247 /Anleitungen/El ektr oni k/FU und Starter/4. Inbetriebnahme/SK 1xxE, SK 2xxE, -FD S/Inbetriebnahme Gerät/Mini mal konfigur ation SK 2x0E [SK 2xxE} @ 1\mod_1343222569379_388.doc x @ 37597 @ 4 @ 1
4.3.4.1 SK 2x0E - Minimal Configuration
The frequency inverter provides all the necessary low voltages (24 V
L1 - L2/N - L3
230/400 V
Frequency inverter
SK 2x0E-...
*with SK 220E and SK 230E: use Gb5 (Terminal 40)
**with SK 220E and SK 230E: use Analog Ln 2 (Terminal 16) and parameterise t400[02] to {1}
Function
Setpoint
Controller enable
Pos : 248 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265495 @ @ 1
BU 0200 en-3118
1/3~ 230/400 V + tE
12*
14**
11
.
43
.
21
22
.
38
39
Setting
External 10 kΩ potentiometer
External switch S1
4 Commissioning
/ 10 V ).
DC DC
Potentiometer
10 kOhm
Switch S1
Motor PTC
113