Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 138

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
41 =
60 =
61 =
62 =
63 =
65 =
Pos : 296 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P000- P099/Parameter P002 – Displ ay-F aktor @ 0\mod_1327573818457_388.doc x @ 7409 @ @ 1
Display factor
P002
(Display factor)
0.01 ... 999.99
The selected operating value in parameter P001 >Select of display< is multiplied with the scaling
factor in P000 and displayed in >Operating parameter display<.
{ 1.00 }
It is therefore possible to display system-specific operating such as e.g. the throughput quantity
Pos : 297 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P000- P099/Parameter P003 – Super vis or-Code [SK 1x0E, SK 2xxE, SK 2xxE-FD S] @ 2\mod_1346931544673_388.doc x @ 42130 @ @ 1
P003 Supervisor code
(Supervisor code)
0 = The supervisor parameters and groups P3xx/P6xx are not visible, otherwise all.
0 ... 9999
1 = All parameters are visible, except groups P3xx and P6xx.
{ 1 }
2 = All parameters are visible, except group P6xx.
3 = All parameters are visible.
4 = ... 9999, only parameters P001 and P003 are visible.
If parameterisation is carried out with the NORDCON software, the settings 4 ... 9999 the
settings are as for the 0 setting. Settings 1 and 2 behave like setting 3.
Pos : 298 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265495 @ @ 1
138
... 59
R stator ident
R rotor ident
L stray stator ident
L stator ident
Information
Reserved, POSICON
Stator resistance determined by means of measurement (P220)
the rotor resistance determined by measurement ((P220) Function 2)
the stray inductance determined
Function 2)
the inductance determined by measurement ((P220) Function 2)
Reserved
Display via NORDCON
by measurement ((P220)
S
BU 0200 en-3118