Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 170

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 426 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Parameter P402 – Abgleic h 0% [SK 2xxE] @ 2\mod_1346931798594_388.doc x @ 42454 @ @ 1
P402
[-01]
Adjustment: 0%
...
(Analogue input adjustment: 0%)
[-06]
[-01]
-50.00 ... 50.00 V
{ all 0.00 }
[-02]
[-03]
[-04]
[-05]
[-06]
This parameter sets the voltage which should correspond with the minimum value of the selected
function for the analogue input 1 or 2. In the factory setting (setpoint) this value is equivalent to
the setpoint set via P104 >Minimum frequency<.
Note
SK 2x0E
For the adjustment of the integrated analogue inputs of the SK2x0E to the type of analogue
signals, the following values must be set:
0 - 10V
2 - 10V
0 - 20mA
4 - 20mA
DIP switches: (please see chapter 4.3.2.3 "DIP switches, analogue input (only SK 2x0E)")
SK xU4-IOE
Standardisation to typical signals, such as 0(2)-10V or 0(4)-20mA is carried out via the DIP switch
on the I/O-extension module. In this case, additional adjustment of parameters (P402) and (P403)
must not be carried out.
Pos : 427 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265495 @ @ 1
170
External Analogue input 1, AIN1 of the first I/O extension (SK xU4-IOE)
External Analogue input 2, AIN2 of the first I/O extension (SK xU4-IOE)
External A.in. 1 2nd IOE, "External analogue input 1 2nd IOE", AIN1 of the second I/O
extension (SK xU4-IOE) (= Analogue input 3)
External A.in. 2 2nd IOE, "External analogue input 2 2nd IOE", AIN2 of the second I/O
extension (SK xU4-IOE) (= Analogue input 4)
Analogue input 1, Analogue input1 (only SK 200E, SK 210E)
Analogue input 2, Analogue input 2 (only SK 2x0E)
→ 0.00 V
→ 2.00 V
→ 0.00 V (enable internal resistance via DIP switch!)
→ 1.00 V (enable internal resistance via DIP switch!)
S
BU 0200 en-3118