Pos : 263.21 /Anl eitungen/Elektroni k/FU und Starter/4. Inbetriebnahme/AS-Interface [all e Ger äte]/Anschl uss _06_01 ( Vari anten 24V Vers orgung Peripheri e) [SK 2xxE] @ 21\mod_1528458786862_388.doc x @ 2425090 @ 5 @ 1

Variants of a 24 V supply for the peripherals (e.g. actuators)

(Valid for SK 225E/ SK 235E, except –AUX,

Pos : 263.22 /Anl eitungen/Elektroni k/FU und Starter/4. Inbetriebnahme/AS-Interface [all e Ger äte]/INFORM ATION - Ver wendung Wandmontageki t mit Lüfter [SK 200E] @ 22\mod_1530175201185_388.doc x @ 2429050 @ @ 1

Information

If the frequency inverter is operated with a SK TIE4-WMK-L-... ( Section 2.1.3.2 "Wall mounting kit with fan")

wall mounting kit, the following must be noted:

•

Power supply to the fan via the frequency inverter is not permitted

•

Only provide the power supply to the fan via a separate 24 V DC power supply (see following example:

"Variant 2 – Use of an optional SK xU4-24V-... mains unit").

Pos : 263.23 /Anl eitungen/Elektroni k/FU und Starter/4. Inbetriebnahme/AS-Interface [all e Ger äte]/Anschl uss _06_02 ( Vari anten 24V Vers orgung Peripheri e) [SK 2xxE] @ 22\mod_1530176240171_388.doc x @ 2429086 @ @ 1

Variant 1 – connection to 24 V (Terminal 44)

•

The limit of 60 mA for the maximum load (total current) must be complied with.

Connection example:

BU 0200 en-3118

AXB)

Use of wall mounting kit with fan

4 Commissioning

123

Table of Contents