Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 18

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 34.5 /Anl eitungen/Elektroni k/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferumfang Z ubehör _03_Br ems widerstände [BU 0180, 0200] @ 6\mod_1430914476094_388.doc x @ 215702 @ @ 1
Internal braking resistors
External braking resistors
Pos : 34.6 /Anl eitungen/Elektroni k/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferumfang Z ubehör _04_IO- Erweiterungen [BU 0180, 0200] @ 6\mod_1430914480308_388.doc x @ 215734 @ @ 1
Internal I/O expansion
Internal signal converter
External I/O extension
Pos : 34.7 /Anl eitungen/Elektroni k/FU und Starter/1. Allgemei nes/Liefer umfang/Lieferumfang Z ubehör _06_Netzteile [BU 0135, 0200] @ 6\mod_1430914528058_388.doc x @ 215862 @ @ 1
Internal power supplies
External power supplies
Pos : 34.8 /Allgemein/Allgemeing ültige M odul e/---------Seitenumbruc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265495 @ @ 1
18
Braking resistor for installation in the device for
leading away generated heat from the drive
system caused by conversion to heat. Energy is
generated by the braking processes or
downward movement of loads,
Model SK BRI4- ...
 Section 2.3.1 "Internal brake resistor SK
BRI4-..."
Refer to:
Internal braking resistors,
but for attaching to the device
Model SK BRE4- ...
 Section 2.3.2 "External braking resistor SK
BRE4-... / SK BRW4-... / SK BREW4-..."
Customer unit for installing in the device for
extending the analogue and digital inputs and
outputs.
Model SK CU4-IOE...
 Section 3.2.1 "Internal customer interfaces
SK CU4-... (installation of modules)"
Customer unit for installation in the device for
converting bipolar analogue signals to unipolar
analogue signals, e.g. digital signals on relays
Model SK CU4-REL- ...
 Section 3.2.1 "Internal customer interfaces
SK CU4-... (installation of modules)"
Technology unit for attaching to the device or
alternatively for wall mounting (wall mounting kit
required) for extending the analogue and digital
inputs and outputs.
Model SK TU4-IOE- ...
 Section 3.2.2 "External technology units
SK TU4-... (module attachment)"
SK 2x5E: Power supply for installation in the
device for generating the low control voltage
(24 V DC).
Model SK CU4-24V- ...
 Section 3.2.1 "Internal customer interfaces
SK CU4-... (installation of modules)"
SK 2x5E: Technology unit for attaching to the
device or alternatively for wall mounting (wall
mounting kit required) for generating the low
control voltage (24 V DC).
Model SK TU4-24V- ...
 Section 3.2.2 "External technology units
SK TU4-... (module attachment)"
BU 0200 en-3118