Fujitsu MB91260B Series Hardware Manual page 474

■ Debugger (sim911, eml911, mon911)
●
Simulator debugger
There is no memory space specification command to indicate the little endian area.
Therefore, memory operation commands and instruction executions that operate memory are treated as big
endian.
●
Emulator debugger and monitor debugger
When the little endian area is accessed by the following commands, it is not treated as a normal value.
– set memory/show memory/enter/examine/set watch command
→ When using floating point (single/double) data, the specified value cannot be set or displayed.
– search memory command
→ When searching halfword and word data, the specified value cannot be searched.
– Line/reverse assemble (including reverse assemble display of the source window)
→ Normal instruction codes cannot be set or displayed (Please do not arrange the instruction code
– call/show call command
→ When the stack area is placed in the little endian area, it does not operate properly (Please do not
in the little endian area).
arrange the stack area in the little endian area).
APPENDIX D Notes When Little Endian Area Is Used
459