About Setup Menu - MIMAKI TS500P-3200 Operation Manual

Chapter 3 Setup

About Setup menu

On Setup menu, you can set the print conditions to match the media you usually use.
Local <Setup 1>
1340mm
PRINT POST 1L POST 2L POST 1R
25° C 34° C 50° C 30° C 32° C
TEST PRINT /
MENU REMOTE
CLEANING
 Setup menus at-a-glance
Local <Setup 1> 12:00
1340mm
PRINT POST 1L POST 2L POST 1R POST 2R
25° C 34° C 50° C 30° C 32° C
TEST PRINT /
MENU REMOTE
CLEANING
Setup 1 1/4
Feed Comp. >
DropPos. Correct >
Heater >
Logical Seek Host
Overprint Host
<< >>
Setup 1 2/4
Drying Time >
Margin/L 0mm
Margin/R 0mm
Refresh Host
Refresh Left OFF
<< >>
Setup 1
3/4
Vacuum Fan Standard
Feed Speed >
>
MAPS4
Auto Nozzle Maint. >
Interval Wiping OFF
<< >>
Setup 1
4/4
Head Gap 2.0mm
Setup Reset >
<< >>
3-2
12:00
POST 2R
MENU
Setup >
Maintenance >
Machine Setup >
Information >
<< >>
Setup 1 1/4
Feed Comp. >
DropPos. Correct >
Heater >
Logical Seek Host
Overprint Host
<< >>
Setup 1 2/4
Drying Time >
Margin/L 0mm
Margin/R 0mm
Refresh Host
Refresh Left OFF
<< >>
Setup 1
3/4
Vacuum Fan Standard
Feed Speed >
>
MAPS4
Auto Nozzle Maint. >
Interval Wiping OFF
<< >>
Setup 1
4/4
Head Gap 2.0mm
Setup Reset >
<< >>
: Press this to select SETTING menu, or to switch to the
previous screen.
: Press this to use the adjust function.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
Setup
● Setup 1
○ Setup 2
Select "SETUP 1 to 4" or "Temporary",
○ Setup 3
and then press the
○ Setup 4
○ Temporary
<< >>
Setup 1 1/4 Setup 1
Feed Comp. > Feed Comp.
DropPos. Correct > DropPos. Correct
Heater > Heater
Logical Seek Host Logical Seek
Overprint Host Overprint
<< >> <<
Setup 1 2/4 Setup 1
Drying Time > Drying Time
Margin/L 0mm Margin/L
Margin/R 0mm Margin/R
Refresh Host Refresh
Refresh Left OFF Refresh Left
<< >> <<
Setup 1 Setup 1
3/4
Vacuum Fan Standard Vacuum Fan
Feed Speed > Feed Speed
>
MAPS4 MAPS4
Auto Nozzle Maint. > Auto Nozzle Maint.
Interval Wiping OFF Interval Wiping
<< >> <<
Setup 1 1/4
Feed Comp. >
DropPos. Correct >
Heater >
key.
Logical Seek HOST
Overprint HOST
<< >>
1/4 Setup 1 1/4
> Feed Comp.
> DropPos. Correct
> Heater
Host Logical Seek Host
Host Overprint Host
>> << >>
2/4 Setup 1 2/4
> Drying Time
0mm Margin/L 0mm
0mm Margin/R 0mm
Host Refresh Host
OFF Refresh Left OFF
>> << >>
Setup 1
3/4 3/4
Standard Vacuum Fan Standard
> Feed Speed
>
MAPS4
> Auto Nozzle Maint.
OFF Interval Wiping OFF
>> << >>
>
>
>
>
>
>
>