Paper Eject Frame Removal - Epson Stylus Pro 5000 Service Manual

Stylus Pro 5000

4.2.5.11 Paper Eject Frame Removal

1. Remove the upper housing. (See section 4.2.1.)
2. Remove the front housing. (See section 4.2.2.)
3. Remove the printer mechanism. (See section 4.2.3.)
4. Remove the printheads. (See section 4.2.5.3.)
5. Remove 2 screws (CBS, 3×30) from each ink tube clamp, then remove
both clamps. (See Figure 4-38.)
Ink Tube Clamps
Screws (CBS, 3×30)
Figure 4-38. Ink Tube Clamp Removal
6. Place the 6 dampers detached during printhead removal in a container
to prevent leaks. (See Figure 4-39.)
Screws (CBS, 3×30)
Figure 4-39. Preventing Ink Leaks
7. Unscrew the flexible tube locking screws, then remove all 6 flexible ink
tubes. (See Figure 4-40.)
Tube Lock Screws Screws (CBS, 3×6)
FFC Reinforcing Plate
Figure 4-40. Ink Tube Removal
Chapter 4 Assembly and Disassembly
Tube Lock Screws
4-21