Power and Ventilation Requirements
Thermal Protection
Battery
Cleaning Recommendation
WARNING
Keysight M8290A Getting Started Guide
For power and ventilation requirements, refer to:
•
http://www.keysight.com/find/M9514A
documentation.
•
http://www.keysight.com/find/M9505A
documentation.
•
http://www.keysight.com/find/M9502A
documentation.
Overheating Detection
The instrument monitors its internal temperature. If the temperature
exceeds approximately 80°C the power supply is switched off. The
instrument will not turn on automatically if the temperature is decreasing
again.
Fan Failure
If a fan is broken or prevented from operating by a blockage the
temperature will increase. When the temperature exceeds approximately
80°C the overheating detection switches off the instrument for safety
reasons. For reliability, it is recommended to send instruments with broken
or defective fans immediately to Keysight Service for repair.
The M829xA does not have a battery.
To prevent electrical shock, disconnect the instrument from mains
before cleaning. Use a dry cloth or one slightly dampened with water to
clean external case parts. Do not attempt to clean internally.
M829xA Maintenance
for 14-slot chassis related
for 5-slot chassis related
for 2-slot chassis related
5
47