Connector Pin Assignments - JCM GLOBAL VEGA-RC Twin Series Integration Manual

4 CONNECTOR PIN ASSIGNMENTS

Table 7 and Table 8 list the VEGA-RC Twin™ Unit's pin assignments, respectively.
Table 7 lists the VEGA-RC Twin™ to VEGA™ Unit Receptacle connector pin assignments.
Table 7 VEGA-RC Twin Recycler to Acceptor Receptacle Pin Assignments
Pin No. Signal Name
1
S GND
2 S GND
3 VEGA - TXD (DL-TTL)
4 VEGA - RXD (DL-TTL)
5 VEGA - ENC
6 VEGA - PSI2
7 VEGA - FRP
8 VEGA - PSI1
9 VDD
10 VDD
11 VDD
12 P GND
13 P GND
14 P GND
*. Hot-swapping is prohibited (DO NOT plug the interconnect cable in or out of the unit while VEGA Unit's power is ON!).
†. I/O (input/output) is the terminal as viewed from the Banknote Recycler's backside.
‡. Voltages in brackets are optional specifications.
P/N 960-000169R_Rev. A {EDP #217859}
VEGA-RC Twin™ Series Banknote Recycler Integration Guide
Post with Base (Side Type): S14B-PHDSS-B (JST)
Housing: PHDR-14VS
Contact: SPHD-002T-P0.5 / AWG#24-28
Recommended Wire: Slit Wire
Signal Line: UL1061 AWG#28 / Power Supply Line: UL1061 AWG#24
†
I/O
-
Signal GND
- Signal GND
Serial data signal output line from Recycler to Acceptor
OUT
(both DL-TDX signals used)
Serial data signal input line from Recycler to Acceptor
IN
(both DL-TDX signals used)
IN Serial data signal input line from Acceptor to Recycler
IN Serial data signal input line from Acceptor to Recycler
IN Serial data signal input line from Acceptor to Recycler
IN Serial data signal input line from Acceptor to Recycler
-
12V DC (24-36V DC)
-
12V DC (24-36V DC)
-
12V DC (24-36V DC)
- Power GND
- Power GND
- Power GND
Function
‡
‡
‡
© 2012, Japan CashMachine Co., Limited
8
*