Table of Contents
Advertisement
Section 6
Figure 6-48 Performance Test Main Screen
Figure 6-48 Performance Test Main Screen
Performance Test Items using a PC
Table 6-1 lists the test items for the DBV-500 Per-
formance Test using a PC.
Table 6-1 Performance Test Items using a PC
Test Items
FEED_MOTOR_FWD_TEST Speed Check with Normal
FEED_MOTOR_REV_TEST
STACK_TEST
SENSOR_TEST
DIPSWITCH1_TEST
DIPSWITCH2_TEST
LED_TEST
CENTERING_TEST
Feed Motor Test
To perform the Feed Motor Normal/Reverse Rotation
Test, proceed as follows:
1. Launch the Performance Test Main Screen
(Review Figure 6-48).
Figure 6-49 Feed Motor Test Selection
a
Figure 6-49 Feed Motor Test Selection
P/N 960-100933R_Rev. 2 {EDP #233449}
DBV™ Series DBV-500 Banknote Acceptor
Test Purpose
Rotation
Speed Check with Reverse
Rotation
Movement Check
(3 sec interval)
Each Sensor Performance
Test
DIP SW1 Performance Test
DIP SW2 Performance Test
LED Performance Test
Movement Check
(3 sec interval)
6 - 1 0
2. Click the "Performance Test" Pull-down Menu
and select the Feed Motor Normal Test
"
FEED_MOTOR_FWD_TEST
Motor Reverse Test "
FEED_MO-
"
TOR_REV_TEST
(Figure 6-49 a).
3. Click the "
"
Start
50 a) to begin the test.
Figure 6-50 Feed Motor Test Start Button
a
Figure 6-50 Feed Motor Test Start Button
4. Confirm that the Feed Motor rotates in a forward/
reverse direction without errors, and motor speed
is in the acceptable range (within approximately
600mm/s to 800mm/s). The measured speed will
appear in the "Motor" area (Figure 6-51 a) on the
Screen.
5. Click the "
"
Stop
51 b) to end the test.
Figure 6-51 Feed Motor Test Stop Button
b
a
Figure 6-51 Feed Motor Test Stop Button
© 2020 JAPAN CASH MACHINE CO., LTD.
Calibration and Testing
" or the Feed
Screen Button (Figure 6-
Screen Button (Figure 6-
Advertisement
Table of Contents
