Microscan MS-860 User Manual page 62

Chapter
6
Communications by ESP.............................................................................6-2
Communications by Serial Command .........................................................6-2
RS-232/422 Host Port .................................................................................6-3
RS-232 Auxiliary Port ..................................................................................6-8
Auxiliary Port System Data........................................................................6-18
Preamble ...................................................................................................6-19
Postamble .................................................................................................6-20
LRC Status ................................................................................................6-21
Response Timeout ....................................................................................6-22
With Microscan's ESP™ (Easy Setup Program), configuration changes can be made in
the ESP menus, then sent and saved to your reader. The user can also send serial
commands to the reader via the ESP's Terminal window.
This section includes connecting parameters and options for communicating by the
auxiliary port and various interfaces.
Note: When assigning characters in user-defined fields, the characters NULL, <, >, and
can only be entered through embedded menus, not through ESP or serial commands.
Note: Default settings for establishing communications are:
Baud = 9600
Parity = Even
Stop Bits = One
Data Bits = Seven
Flow Control = None
MS-860 Industrial Raster Reader User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Communications
Chapter Contents
,
6-1