Appendix J Embedded Menus - Microscan MS-860 User Manual

Embedded Menus
Appendix J — Embedded Menus
In addition to ESP, you can also use a communications menu such as Microsoft's Hyper-
™
Terminal to establish communication with Microscan's embedded menus.
size/space limitations of embedded menus, their structures and terms may not pre-
cisely match those of ESP or this manual.
1. With your host connected to MS-860, set your host communications settings as
follows: 9600 baud,
2. Set Flow Control to None.
3. Make the communications port selection. (Usually
Upon connection, send a
Menu navigation commands are case sensitive. Use the space bar or
CR
the next item, (return key) to select a highlighted item,
item, M to return to the previous menu, and
the program. When exiting the program, you will be prompted to save your active set-
tings for power up (Y or N). Typing Y will be equivalent to saving with a
1. If you are using Microsoft's HyperTerminal program, you may find that the initial screen is not
visible when you call up the program with the
menu with a ESC, E, and
A-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7 Data Bits, 1 Stop Bits, and
<D> command to bring up the main menu.
ESC to return to the Main menu or to exit
<D> command. If this occurs, exit the embedded
N sequence and repeat the
MS-860 Industrial Raster Reader User's Manual
1
None Parity.
COM 1
for Windows.)
N to advance to
B
to return to the previous
<Z>
<D> command.
Because of
command.