Microscan MS-860 User Manual page 129

1D Symbologies
Important:
• When setting Symbol Length to any number other than zero, add
reserved spaces. For example, if your symbol has
to 5.
• If Symbol Length is set to zero (0) and Symbol Length Status is set to
Minimum, all symbol lengths are decoded.
Note: Fixed Symbol Length Status must be enabled for Symbol Length to take effect.
Note: Because of symbology limitations, setting Symbol Length to any number less
than four will produce undetermined results.
Check Digit Type
Usage: Modulus 16 is used in the photo-finishing market.NW7 is used in Japa-
nese markets.
Definition: Allows the user to select the check digit type Codabar will use.
Serial Cmd: <K471,status,start & stop match,start & stop output status,large inter-
character gap,fixed symbol length status,fixed symbol
digit type,check digit output status>
Default: Disabled
Options: 0 = Disabled
1 = Modulus 16
Check Digit Output Status
Usage: For additional security a check digit can be added to the symbol.
Definition: When enabled, the check digit character is sent along with the symbol
data. When disabled, symbol data is sent without the check digit.
Serial Cmd: <K471,status,start & stop match,start & stop output status,large inter-
character gap,fixed symbol length status,symbol length,check digit
type,check digit output
Default: Disabled
Options: 0 = Disabled
9-16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3 characters, set Symbol Length
2 = NW 7
3 = Both
status>
1 = Enabled
MS-860 Industrial Raster Reader User's Manual
2 to account for
Any/
length,check