Ez Mode - Microscan MS-860 User Manual

EZ Mode

EZ Mode

In EZ Mode you are presented with the
cation, Calibration. After connecting to your reader (or reader) the Setup Mode will
first appear. This will provide you with instructions specific to your model that will help
you in positioning, testing, and if appropriate, calibrating.
Test
Click the Test button to start the read rate test for a quick indication of the read capa-
bilities and the limits of your application. When Decodes per Second is unchecked,
the test will count the percentage of decodes relative to the number of actual scans.
Stop
Click to end the test.
Calibrate
Some models include a calibration routine that will optimize reads by comparing read
rates at various settings in focal lengths, scan speeds, and gain settings.
Note: This view may be
slightly different for each
model.
On some models, clicking Autodiscriminate will
enable most available symbology types.
2-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Test option and, if appropriate for your appli-
Click here to change
from percentage of
Test Button
good decodes to
decodes per second
Ends the read rate test
MS-860 Industrial Raster Reader User's Manual
Calibration is available
on some models
Saves Calibration
results (if available)