Microscan MS-860 User Manual page 103

Reader Setup
AGC Minimum Gain
Definition: Limits the minimum range of the available gain.
Serial Cmd: <K504,gain level,AGC sampling
Send <K504?>
Default: 0 (low or medium density reader)
Options 0 to 255
AGC Maximum Gain
Definition: Limits the maximum range of the available gain.
Serial Cmd: <K504,gain level,AGC sampling mode,AGC
Send <K504?>
Default: 255 (low or medium density reader)
Options 0 to 255
Symbol Detect Status
Definition: During the read cycle, the reader counts the number of bar and space
transitions defined in the Transition Counter. If the count matches or
exceeds the threshold, the reader will perform AGC routines. When
enabled, a bad symbol or no symbol message can be output rather than
a noread message, depending on the number of transition counts.
Serial Cmd: <K505,symbol detect
Default: Disabled
Options: 0 = Disabled
Note: Symbol Detect can only be used when
<K504> is set to Fixed Gain and
output is enabled.
7-20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
mode,AGC
for a readout.
for a readout.
status,transition counter>
1 = Enabled
"AGC Sampling Mode"
"No Symbol Message"
MS-860 Industrial Raster Reader User's Manual
min,AGC max>
min,AGC max>
on page 7-19
on page 10-9 <K716>