Microscan MS-860 User Manual page 35

Send/Receive Options
Defaulting
When you select Default Current... or Default all ESP... you are only defaulting the
ESP settings.
Advanced Options
Send Current View
This is the same as Save
to Reader, Send No Save
except that only the com-
mands in the current menu
tree are sent.
Send Current Command
This is the same as Send
Current View
above, but
only saves the command
that is currently selected.
Add Exceptions
After you perform a Receive from Reader
Exception option you may see a list of serial commands. These are serial commands
that may be in your reader's firmware, but not included or different from your current
ESP software.
You can edit these commands by double-clicking on them and changing as needed.
When exceptions are present, you can also access them from an
that will appear on the Applications button bar.
It is important to note that these commands will be saved to your
reader whenever you send a
<A> or a
Also, if there is a corresponding ESP menu item, the ESP Value column
for that item will be blank following a
1. From the Send/Recv button or right-clicking from within the tree menus.
2-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
command
Save to Reader
<Z> command.
MS-860 Industrial Raster Reader User's Manual
1
and you click on the Add
Exceptions button
command or send an
Receive from Reader command.