Calibration Dialog - Microscan MS-860 User Manual

Calibration Dialog

1. In App Mode, click the
top of ESP to open the calibration menu.
Fixed Parameter Calibration
2. In the
more parameters that you do NOT want to change.
3. Wait for the calibration to cycle through the various settings looking
for the best combination. A "Calibration Successful" message
should eventually appear.
4. Click Save to save for power-on (same as a
Use the Test
Start the calibration
button to start a
procedure by clicking
read rate test
the Calibrate
Start Raster or Laser
framing procedure
Click Save to save
for power-on
MS-860 Industrial Raster Reader User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Calibration button on the icon bar at the
area you can select one or
<Z>
Choose between
Raster Framing
and Laser Framing
button
Click Stop to end
Test or Calibration
Calibration Display
Calibration
command).
These are the parameters
that can be adjusted during
the calibration procedure
If checked, the
associated
parameter(s) will
not change during
calibration
See "Raster
Options"
page 4-6.
Reset
parameters
in this group
on
4-5