Table of Contents
Advertisement
Multisymbol Output Format Status
Multisymbol Output Format Status
Symbol Output Format Status corresponds directly with symbols setup in Multisym-
bol. If Number of Symbols in Multisymbol is set to the default 1, then only Symbol #1
in Symbol Output Format Status will be enabled. See
Multisymbol Number
Usage:
Allows the user to set up as many symbols that are already assigned in
Multisymbol for output and filter formatting.
Definition:
Specifies the symbol in a multisymbol operation to which output format
status is being applied.
Serial Cmd:
<K742,symbol
Options:
1 to 12, as applicable to symbol number.
Output Format Status
Serial Cmd:
<K742,symbol number,status>
Default:
Disabled
Options:
0 = Disabled
Enabled means output format control is assigned to a symbol number specified in the
first field; for example
<K742,9,1>
13-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
"Multisymbol"
number,status>
1 = Enabled
enables symbol number 9.
MS-860 Industrial Raster Reader User's Manual
on page 7-4.
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-860 and is the answer not in the manual?