Job Duration Display
If Job Duration Display is set to 'On', the remaining time that it takes to complete an
operation is displayed in units of one minute on the touch panel display. However,
not all copy modes support this feature.
NOTE
•
The waiting time is displayed as <Approx Prt Time> (approximate printing time) on the
screen that is displayed when the machine is printing.
•
Even if Job Duration Display is set to 'On', the waiting time is not displayed in the
following cases:
- The waiting time is less than one minute.
- When the Different Size Originals mode is set with the 1 2-Sided or 2 2-Sided mode
- When heavy paper or transparencies is selected as the paper type
- When paper is fed from the stack bypass
•
If the Staple mode is specified, the discrepancy between the displayed waiting time and
the actual waiting time may increase.
•
The default setting is 'Off'.
1
9
9-10
Job Duration Display
(Additional Functions) © [Copy Settings] © [Job
Press
Duration Display].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.