Booklet Mode
This mode enables you to copy one-sided or two-sided originals in such a way that
the copies are made into a booklet.
Originals
1
2
3
5
6
7
IMPORTANT
•
The Booklet mode cannot be used with the Stack Bypass Settings (2nd Side of 2-Sided
Page), Entire Image, Multi-Page Enlargement, Automatic Paper Selection, Finisher,
Two-sided, Two-page Separation, Cover/Sheet Insertion, Shift (No. Key Entry), Image
Combination, Transparency Interleaving, Margin, Different Size Originals, Frame Erase,
Image Repeat, Mirror Image, Area Designation, or Tab Paper mode.
•
Make sure to place originals with a vertical (portrait) orientation vertically. If these
originals are placed horizontally, the even numbered pages will be printed upside down.
•
Saddle stitching is not performed if there is only one output sheet.
•
Saddle stitching can be performed only if the optional Saddle Finisher-N2 is attached.
•
The accuracy of folds created in the Saddle Stitch mode may vary, depending on the type
and quantity of paper.
4
8
Copy
8
1
6
3
The optional Saddle
Finisher-N2 is attached.
Booklet Mode
3-13
3