Canon imageRUNNER C3220 Copying Manual page 124

2
2
3
2-40 Changing the Copy (Zoom) Ratio
Press [Zoom Program].
Use the numeric keys on the touch panel display to enter
values for the original size and copy size.
❑
Press [Original Size] © enter a value.
❑
Press [Copy Size] © enter a value.
❑
Press [OK].
You can enter either the width or the length of the original size. If you enter the
width for the original size, make sure to enter the width for the copy size as
well, and vice versa.
The machine automatically calculates the correct copy ratio based on the
values you entered; however, the original image may be cut off slightly on the
copy depending on the paper size.
If the computation results in a copy ratio less than 25% or greater than 400%,
a message appears telling you that values below 25% will be set to 25%, and
values above 400% will be set to 400%.