Canon imageRUNNER C3220 Copying Manual page 233

3
Press [-] or [+] to set the frame erase width © press [OK] ©
[Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering the value in millimeters, you can also use
and (Clear) to clear your entry.
•
You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '3/4" (18 mm)'. The maximum binding erase width that you
can set is '13/16" (20 mm)'.
4
Press (Start).
Copying starts.
IMPORTANT
If the original contains fine text or print, such as a map, the machine may need to
read or scan the document several times. Do not remove the original from the
platen glass until scanning is complete.
NOTE
To cancel this setting, press [Special Features] © [Frame Erase] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
- (numeric keys),
Frame Erase 4-23
4