IMPORTANT
•
When the Auto-Color Select mode is set and your originals contain color sections,
the machine copies them in the Full Color mode. However, the machine may copy
the color originals in the Black mode under the following conditions. To avoid this,
set the color mode to 'Full Color'. (See "Full Color," on p. 2-92.)
- If the originals contain few color sections
- If the originals contain light color densities
- If the color sections of the originals are close to black
•
When using the platen glass to make copies of a bound original, such as a thick
book, in the Auto-Color Select mode, press the book flat against the platen glass,
leaving no space. Otherwise, a black-and-white original may be detected as a color
original.
NOTE
On the Copy Basic Features screen, you can select the color mode, paper size and
type, copy exposure, original type, copy ratio, two-sided mode, and the desired
Finisher mode.
5
Set the desired copy modes on the Special Features screen.
❑
Press [Special Features].
Flow of Copy Operations
1
1-15