Recalling Copy Settings
1
Press [Special Features] © press [M] or [L] until [Mode
Memory] appears © press [Mode Memory].
If necessary, see the screen shot in step 2 of "Storing Copy Settings," on p. 8-4.
2
Select the key containing the copy settings that you want to
recall.
3
Verify the settings © press [OK] © [Done].
If you select a key that does not have copy settings stored in it, [OK] is grayed
out and cannot be pressed.
You can select another key that has copy settings stored in it, or press [Cancel].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
Recalling copy settings from memory cancels the current copy settings.
•
You can make changes to the recalled copy settings.
•
If you press another key, the copy settings stored in that key are recalled.
Memory Keys
8-9
8