Canon imageRUNNER C3220 Copying Manual page 99

❑
Press [Next].
❑
Select the desired paper type © press [OK].
If you are copying on the back side of a previously printed sheet, press
[2nd Side of 2-Sided Page].
IMPORTANT
•
When printing on special types of paper, such as heavy paper or transparencies,
be sure to correctly set the paper type, especially if you are using heavy paper. If
the type of paper is not set correctly, it could adversely affect the quality of the
image. Moreover, the fixing unit may become dirty and require a service repair, or
the paper could jam.
•
If you select a nonstandard paper size, the Multi-Page Enlargement, Offset Collate,
Offset Group, Rotate Collate, Rotate Group, Staple, Book 2-Sided, Two-page
Separation, Cover/Sheet Insertion, Image Combination, Booklet, Transparency
Interleaving, or Tab Paper mode cannot be specified.
NOTE
•
If you want to specify the 1 2-Sided or 2 2-Sided mode when copying on
nonstandard size paper, make sure to set the paper size manually after specifying
two-sided copying. The available setting range is as follows:
- Length (X): 7 1/8" to 18" (182 mm to 457 mm)
- Width (Y): 4 1/8" to 12" (105 mm to 305 mm)
•
For more information on paper types, see Chapter 2, "Basic Operations," in the
Reference Guide.
Paper Selection 2-15
2