Setting The X And Y Axes Independently - Canon imageRUNNER C3220 Copying Manual

Setting the X and Y Axes Independently

The XY Zoom mode enables you to make reduced or enlarged copies with different
XY copy ratios expressed in percentages. Any copy ratio from 25% to 400% can be
set.
The following two XY Zoom modes are available:
I Manually Specifying the Copy Ratio (XY Zoom)
You can manually set different copy ratios for the horizontal (X) and vertical (Y) axes,
expressed in percentages and in 1% increments.
NOTE
If you set the copy ratio with the XY Zoom mode, the image of the original may be rotated
before being printed on the paper depending on the outcome of the computation
executed by the machine using the original size and the specified copy ratio. This is so
the orientation of the printed image is best suited to the selected paper size.
I Automatically Specifying the Copy Ratio (Auto XY Zoom)
The XY copy ratio is automatically set to suit the size of the selected paper.
IMPORTANT
•
The Auto XY Zoom mode cannot be used with the Automatic Paper Selection, Image
Repeat (Auto), or Tab Paper mode.
•
You cannot copy highly transparent originals, such as transparencies, in the Auto XY
Zoom mode. Manually specify the copy ratio for these types of originals.
•
If you set the Auto XY Zoom mode, select the paper size using the Manual Paper
Selection mode. If you do not select a paper size, Paper Drawer 1 is automatically
selected and the copy ratio is set to match the size of the paper loaded in that drawer.
•
If you set the copy ratio in the Auto XY Zoom mode, Auto Orientation is not performed.
NOTE
If you notice a difference between the copy ratio and the actual copy size, you can try to
eliminate this error by making a Zoom Fine Adjustment in Adjustment/Cleaning (from the
Additional Functions screen). (See Chapter 4, "Customizing Settings," in the Reference
Guide.)
Changing the Copy (Zoom) Ratio
2
2-45