Two-Sided Copying
This mode enables you to make two-sided copies from one-sided or two-sided
originals, or make one-sided copies from two-sided originals.
2
IMPORTANT
You may not be able to make two-sided copies on some types of paper, depending on the
paper.
NOTE
•
If you are copying in the Two-sided mode, align the top edge of the original with the back
edge of the platen glass (by the arrow in the top left corner), or with the back edge of the
feeder.
•
The Two-sided mode you have selected is displayed above [Two-sided] on the Copy
Basic Features screen.
•
Paper used to make two-sided copies must conform to the following specifications:
- Paper size: 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC, or STMTR (envelopes cannot
- Paper weight: 17 lb bond to 110 lb index (64 to 209 g/m
•
If you want to specify the 1 2-Sided or 2 2-Sided mode when copying on nonstandard
size paper, make sure to set the paper size manually after specifying two-sided copying.
The available setting range is as follows:
-
-
I Making Two-Sided Copies from One-Sided Originals (1 2-Sided)
This feature enables you to make two-sided copies from one-sided originals.
2-76
Two-Sided Copying
be used for two-sided copying)
Length (X):
7 1/8" to 18" (182 mm to 457 mm)
Width (Y):
4 1/8" to 12" (105 mm to 305 mm)
Originals
2
)
Copy