Canon imageRUNNER C3220 Copying Manual page 220

4
4-10 Margin Mode
G If you select [Left Margin] or [Right Margin]:
❑
Press [-] or [+] to set the margin width for the front and back (0" to 13/16" or 0
mm to 20 mm) © press [OK] © [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
G If you select [Top Margin] or [Bottom Margin]:
❑
Press [-] or [+] to set the margin width (1/16" to 13/16" or 1 mm to 20 mm) ©
press [OK] © [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
- (numeric keys), and