NOTE
To continue designating other areas, press an area key © repeat step 4.
•
To redesignate an area, select the area by pressing the appropriate area key ©
•
repeat step 4 © press [Done].
To clear a designated area, select the area by pressing the appropriate area key ©
•
press [Clear Area].
•
If you want to use different settings for different areas, select the area by pressing
the appropriate area key © select [Framing] or [Blanking].
6
Press [OK] © [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
If you entered a value outside the setting range for [X1], [X2], [Y1], or [Y2] in step 4,
a message prompting you to enter an appropriate value appears on the screen.
•
If there are multiple designated areas and [Framing] is specified for one or more of
the areas, press [Next] © select [Shift center] or [Do not shift center] © press [OK]
© [Done].
Area Keys
Area Designation
6-41
6