4
Press [OK] © [Done].
The display returns to the Copy Basic Features screen.
NOTE
You can assign a name to the memory key by pressing [Register Name].
Naming a Memory Key
1
Press [Special Features] © press [M] or [L] until [Mode
Memory] appears © press [Mode Memory].
If necessary, see the screen shot in step 2 of "Storing Copy Settings," on p. 8-4.
2
Select a key ([M1] to [M9]) to name © press [Register Name].
NOTE
•
Keys that already have settings stored in them are displayed with a colored triangle
( ) in the lower right corner of the key.
•
If you select a key that already has settings stored in it, the settings are displayed.
•
You can also name keys with no settings stored in them.
•
If there are more stored copy settings than are currently displayed, you can scroll
through the list by pressing [M] or [L].
Memory Keys
8-7
8