Canon imageRUNNER C3220 Copying Manual page 276

6
5
6-30 Area Designation
NOTE
•
If you make a mistake when entering values, press [C] on the inch entry pop-up
screen © enter the correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in
the Reference Guide.
To change a value you entered, press [X1], [X2], [Y1], or [Y2] © enter the correct
•
value using the numeric keys on the inch entry pop-up screen.
•
To check the designated area, press [Check Area].
Press [Framing].
- (numeric keys), and