Canon imageRUNNER C3220 Copying Manual page 244

2
5
3
5-10 Job Done Notice
If you want to select a destination managed with the Access
Number Management mode, press [Access Number].
If you want to select a destination that is not managed with the Access Number
Management mode, or if the Access Number Management mode is not set to
'On', proceed to step 4.
NOTE
To display [Access Number], set Access Number Management to 'On'. To access
the Access Number Management mode, press
[System Settings] © [Restrict Access to Destinations] © [Access Number
Management]. (See Chapter 11, "System Manager Settings," in the Sending and
Facsimile Guide.)
Enter the access number for the selected destination using
(numeric keys) © press [OK].
-
If you press [No Access Number], the destinations that are not managed with the
Access Number Management mode are displayed.
(Additional Functions) ©