2
5
2-44
Changing the Copy (Zoom) Ratio
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
© enter the correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in
the Reference Guide.
•
To specify the same copy ratio for both the horizontal (X) and vertical (Y) axes,
press [Zoom].
Press
(Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press [Direct].
To cancel this setting, press [Copy Ratio] © [Zoom Program] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
-
(numeric keys), and