Canon imageRUNNER C3220 Copying Manual page 269

NOTE
•
To clear the last point entered, press [Erase Point]. (Once an area is designated,
[Erase Point] changes to [Clear Area].)
•
To clear a designated area, press [Clear Area].
To zoom in on any area on the original, press the ratio drop-down list © select an
•
enlargement ratio © press [ ], [ ], [M], or [L] to display the desired area.
G To designate a rectangular area with two points:
❑
Designate two opposing points with the edit pen.
You can designate up to four different areas.
G To designate an area with multiple points:
❑
Press [Multi-point] © specify the area with the edit pen.
❑
After designating the last point, press [Fix Multipoints].
You can designate up to 10 points.
Ratio
Area Designation 6-23
6