Canon imageRUNNER C3220 Copying Manual page 148

I If No Finisher Mode Is Set:
If the Collate, Group, and Staple modes are not set, copies are output as follows:
2
I If the Rotate Mode Is Set:
If the copies are of the same size, the sheets are automatically collated into sets arranged
in page order, and are output in alternating directions as follows:
IMPORTANT
•
The Rotate mode cannot be used with the Multi-Page Enlargement, Automatic Paper
Selection, Cover/Sheet Insertion, Booklet, Transparency Interleaving, or Tab Paper
mode.
•
You can only select LTR or LTRR paper.
•
[Rotate] can be selected only if the machine is not equipped with an optional finisher.
I If the Offset Mode Is Set:
The copies are slightly offset vertically in the output tray as follows:
2-64 Collating Copies
Originals
1
2
3
4
Originals
1
2
3
4
Originals
1
2
3
4
Copies
Copies
Copies