2
2-66
Collating Copies
An optional finisher is not attached.
[Offset] appears only if an optional finisher is attached.
[Rotate] appears only if an optional finisher is not attached.
G If you select [Rotate]:
❑
Press [Next] © select [LTR] or [LTRR].
IMPORTANT
[Rotate] can be selected only in the following cases:
- When the available paper size is selected manually
- When the available paper size is loaded in both the horizontal and vertical
directions
- The selected paper source must have Drawer Eligibility For APS/ADS in Common
Settings (from the Additional Functions screen) set to 'On'. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)